Abstract:As is well known, a solid oxide fuel cell(SOFC) is a device that can convert chemical energy directly into electrical energy. The possibility to grow thin films of oxide materials is of great importance in the development of SOFC. Recently, it is expected that oxide heterostructures, with almost ideal interfaces, should lead to the interesting artificial materials with some novel properties. So we have prepared superlattice electrolyte thin films.On the MgO single-crystal substrates, multilayer epitaxial thin-film heterostructures of 20 mol% samarium-oxide-doped ceria (Ce0.8Sm0.2O2-, SDC) and 8 mol% yttria-stabilized zirconia (Y2O3: ZrO2YSZ) have been deposited in turn, using the pulsed laser deposition (PLD) technique. Five different superlattices (SDC/YSZ)N (N=3, 5, 10, 20, 30) films are fabricated, keeping the total thickness constant (300 nm), but with a different number of hetero-interfaces. The choice of coupling SDC and YSZ aims to have both layers in the superlattices made of oxygen-ion conductors with compatible crystallographic features. On one hand, we have to remove any potential contribution of the deposition substrate to the total conductivity, and the superlattices may be grown on 110-oriented MgO single-crystalline wafers. On the other hand, the YSZ electrolyte film requires that the temperature should be higher, and SDC as the electrolyte leakage; both should be combined with each other, so as to have complementary advantages. In this way, not only the temperature of SOFCs is reduced, but also the leakage avoided. Because YSZ and SDC both belong to cubic fluorite structure and have similar lattice parameters, the lattice constant of YSZ is 5.14 , and the lattice constant of SDC is 5.44 . Compatible crystal properties, oxygen ion conductivity, and great matching defects can lead to a semi-coherent interface between the ZrO2 and CeO2 layers. The interface effect is obvious. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM) and AC impedance mearurements are used to characterize the surface morphology, phase structure and electrical properties of the electrolyte film. Results show that the superlattice (SDC/YSZ)N electrolyte films will form obviously interface and better superlattice structure. This kind of thin films do not show crack, with no element diffusion at the interfaces, growing uniformly, densely and smoothly. Electrochemical measurements show a sizable increase in conductivity with increasing number of SDC/YSZ interfaces. So it is an ideal low-temperature fuel cell electrolyte materials.

Considerable Hydrogen Permeation Behavior Through A Dense Ce0.8sm0.2o2-Delta (Sdc) Asymmetric Thick Film

Low Temperature Solid Oxide Fuel Cells Based on Sm0.2Ce0.8O1.9 Films Fabricated by Slurry Spin Coating

Preparation of Sm(x)Ce(1-x)O2(SDC) electrolyte film with gradient structure via a gas-phase controlling convection-diffusion approach on porous substrate

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Densification of Sm0.2Ce0.8O1.9 with the Addition of Lithium Oxide As Sintering Aid

Interfacial Effects On Electrical Conductivity In Ultrafine-Grained Sm0.2ce0.8o2_(Delta) Electrolytes Fabricated By A Two-Step Sintering Process

Preparation of SmxCe1−xO2(SDC) electrolyte film with gradient structure via a gas-phase controlling convection–diffusion approach on porous substrate

On the composition of Sr2Fe1.5Mo0.5O6-δ – Sm0.2Ce0.8O2-δ composite as fuel electrodes for hydrogen reversible solid oxide cells

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

LSM–SDC electrodes fabricated with an ion-impregnating process for SOFCs with doped ceria electrolytes

A Screen-Printed Ce0.8Sm0.2O1.9 Film Solid Oxide Fuel Cell with a Ba0.5Sr0.5Co0.8Fe0.2O3−δ Cathode

Sm0.5Sr0.5CoO3–Ce1.8Sm0.2O1.9 Electrodes Enhanced by Sm0.5Sr0.5CoO3 Impregnation for Proton Conductor Based Solid Oxide Fuel Cells

A Cobalt-Free Sm0.5Sr0.5Fe0.8Cu0.2O3−δ–Ce0.8Sm0.2O2−δ Composite Cathode for Proton-Conducting Solid Oxide Fuel Cells

High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3-δ-Ce0.8Sm0.2O2-δ composite cathode

Electrochemical Properties of a Dual-Ion Semiconductor-Ionic Co0.2Zn0.8O-Sm0.20Ce0.80O2−δ Composite for a High-Performance Low-Temperature Solid Oxide Fuel Cell

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

High reactive Ce0.8Sm0.2O1.9 powders via a carbonate co-precipitation method as electrolytes for low-temperature solid oxide fuel cells

Co-Sintering of SDC / NiO-SDC Bi-Layers Prepared by Tape Casting

A novel electronic current-blocked stable mixed ionic conductor for solid oxide fuel cells

Preparation of Ultra-Fine Sm0.2Ce0.8O1.9 Powder by a Novel Solid State Reaction and Fabrication of Dense Sm0.2Ce0.8O1.9 Electrolyte Film

Preparation and Characterization of the Superlattice (Sm-Doped Ceria/Yttria-Stabilized Zirconia)N Electrolyte Film