Abstract:Novel anion exchange membranes (AEMs), based on poly(phenylene oxide) (PPO) chains linked to pendant 1,2-dimethylimidazolium (DIm) functional groups, have been prepared for evaluation in alkaline polymer electrolyte membrane fuel cells (APEFCs). Successful functionalisation of the PPO chains was confirmed using H-1-NMR and FT-IR spectroscopies. The ionic conductivities of the resulting DIm-PPO AEMs at 30 degrees C are in the ranges of 10-40 mS cm(-1) and 18-75 mS cm(-1) at 60 degrees C. The high ionic conductivities are attributed to the highly developed microstructures of the membranes, which feature well-defined and interconnected ionic channels (confirmed by atomic force microscopy, AFM, measurements). Promisingly, the ion-exchange capacities (IECs) of the DIm-PPO AEM are maintained after immersion in an aqueous KOH solution (2 mol dm(-3)) for 219 h at 25 degrees C; a previously developed monomethyl imidazolium PPO analogue AEM (Im-PPO) showed a significant decline in IEC on similar treatment. This reduction in undesirable attack by the OH- conducting anions is ascribed to an increase in steric interference and removal of the acidic C2 proton [in the monomethyl Im-groups] by the methyl group in the DIm cationic ring. Moreover, the maximum power densities produced in simple beginning-of-life single cell H-2/O-2 fuel cell tests increased from 30 mW cm (2) to 56 mW cm (2) when switching from the Im-PPO AEM (fuel cell temperature = 50 degrees C) to the DIm-PPO-0.54 AEM (fuel cell temperature = 35 degrees C) respectively (even with the use of lower temperatures).

Anion Conducting Poly(vinyl Alcohol)/poly(diallyldimethylammonium Chloride) Membranes with High Durable Alkaline Stability for Polymer Electrolyte Membrane Fuel Cells

Quaternized Poly(phthalazinone Ether Ketone) Membranes for Alkaline Fuel Cells

Poly(Ethylene Glycol) Plasticized Poly(Vinyl Alcohol)/Poly(Acrylamide-Co-Diallyldimethylammonium Chloride) As Alkaline Anion-Exchange Membrane for Potential Fuel Cell Applications

High durable poly(vinyl alcohol)/Quaterized hydroxyethylcellulose ethoxylate anion exchange membranes for direct methanol alkaline fuel cells

Anion exchange membranes with fast ion transport channels driven by cation-dipole interactions for alkaline fuel cells

Esterification modification and characterization of polyvinyl alcohol anion exchange membrane for direct methanol fuel cell

Alkali resistant and conductive guanidinium-based anion-exchange membranes for alkaline polymer electrolyte fuel cells

Elastic and Conductive Cross‐linked Anion Exchange Membranes Based on Polyphenylene Oxide and Poly(vinyl alcohol) for H2‐O2 Fuel Cells

Alkaline polymer electrolytes containing pendant dimethylimidazolium groups for alkaline membrane fuel cells

Cationic metal–organic framework porous membranes with high hydroxide conductivity and alkaline resistance for fuel cells

Aromatic Polyelectrolytes Via Polyacylation Of Pre-Quaternized Monomers For Alkaline Fuel Cells

Intrinsic microporous poly(phenyl-alkane)s with pendent piperazinium for high performance anion exchange membrane fuel cells

Highly Anion Conductive, Alkyl-Chain-Grafted Copolymers As Anion Exchange Membranes for Operable Alkaline H-2/O-2 Fuel Cells

A Study on Synthesis of Chemical Crosslinked Polyvinyl Alcohol-Based Alkaline Membrane for the Use in Low-Temperature Alkaline Direct Ethanol Fuel Cell

Highly Conducting and Stable Partial Fluorinated Polymer–Silica-Based Anion Exchange Membrane for Alkaline Fuel Cells

Poly (ether ether ketone ketone) based imidazolium as anion exchange membranes for alkaline fuel cells

Self-crosslinked Alkaline Electrolyte Membranes Based on Quaternary Ammonium Poly (ether Sulfone) for High-Performance Alkaline Fuel Cells

Long side-chain N -heterocyclic cation based ionic liquid grafted poly(terphenyl piperidinium) membranes for anion exchange membrane fuel cell applications

Development of imidazolium-type alkaline anion exchange membranes for fuel cell application

Cyclic Olefin Copolymer-Based Reinforced Anion Exchange Membrane for Fuel Cell

Branched Poly(ether Ether Ketone) Based Anion Exchange Membrane for H2/O2 Fuel Cell