Abstract:In this work, we demonstrate an ultrasensitive, visible-blind ultraviolet (UV) photodetector based on perovskite–polymer hybrid structure. A novel wide-band-gap vacancy-ordered lead-free inorganic perovskite Cs2SnCl6 with Nd3+ doping is employed in the active layer of this hybrid photodetector. Remarkably, with interfacial charge-controlled hole-injection operating mechanism, our device achieves a maximum detectivity of 6.3 × 1015 Jones at 372 nm, fast photoresponse speed with rise time and fall time in the order of milliseconds, and a large linear dynamic range of 118 dB. The performance is significantly better than most of the existing organic and inorganic semiconductor UV photodetectors reported so far, and its detectivity is close to 1 order of magnitude higher than that of the photomultiplication tube (PMT) in the UV region. In addition, the photodetector demonstrated excellent environmental stability, which is critical for commercial deployment of perovskite-based optoelectronic devices. The results presented in this work open a new route toward development of high-performance optoelectronic devices using perovskite-based hybrid nanomaterial systems.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09890?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09890</a>.High-resolution SEM images of the undoped Cs2SnCl6 NPs and Cs2SnCl6:Nd3+ NPs; dispersity of Cs2SnCl6 NPs and Cs2SnCl6:Nd3+ NPs in dichlorobenzene solvent; XPS survey spectrum of the synthesized Cs2SnCl6:Nd3+ NPs; High-resolution XPS spectra of Cs2SnCl6 and Nd-doped Cs2SnCl6; Tauc plot for Cs2SnCl6:Nd3+ NPs for optical band gap calculation; J–V characteristics of the reference photodetector fabricated from the undoped Cs2SnCl6 NPs; photoresponsivity and EQE of the reference photodetector fabricated from the undoped Cs2SnCl6 NPs; current density versus voltage (J–V) characteristics of the electron-only and hole-only devices; device structure employed in the simulation; the normalized absolute total current of the simulated device without and with UV illumination; overall performance of the hybrid fiber UV photodetector in this work in comparison with various state-of-the-art UV photodetectors in terms of maximum detectivity and response speed (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09890/suppl_file/am0c09890_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

New Wide-Bandgap Organic Donor and Its Application in UVB Sensors with High Responsivity

A New Wide Bandgap Organic Semiconductor and Its Application in Organic UV Sensors with Tunable Response Wavelength

Ultra-wide Bandgap Organic Acceptor Material and Its Application in Organic UV Photodetector

Spectral response tuning and realization of quasi-solar-blind detection in organic ultraviolet photodetectors

High Selectivity and Wide Range UV Photodetection in PEDOT:PSS/ Lu0.27Sn0.73O/ZnO Heterojunction

High Performance Solar-Blind UV Detectors Based on N-Type Wide Bandgap Organic Materials

Donor–Acceptor Molecules with Locked sp3 Carbon Link for Highly Efficient Near Ultraviolet Organic Light‐Emitting Diodes

An Ultrahigh Responsivity Self-Powered Solar-Blind Photodetector Based on a Centimeter-Sized Β-Ga2o3/polyaniline Heterojunction.

Semitransparent Indium-Tin-oxide-free Non-Fullerene Organic Photodetectors with Double-Side Ultraviolet Selective Responses

NIR Photodetectors with Highly Efficient Detectivity Enabled by 2D Fluorinated Dithienopicenocarbazole‐Based Ultra‐Narrow Bandgap Acceptors

High-Sensitivity Visible-Near Infrared Organic Photodetectors Based on Non-Fullerene Acceptors

Ultranarrow-bandgap small-molecule acceptor enables sensitive SWIR detection and dynamic upconversion imaging

High-performance UV light detector using layered perovskites and textured silicon heterojunction

P3HT-Based Organic Solar Cells with a Photoresponse to 1000 nm Enabled by Narrow Band Gap Nonfullerene Acceptors with High HOMO Levels

Donor–acceptor–donor molecules for high performance near ultraviolet organic light-emitting diodes via hybridized local and charge-transfer processes

Design of All-Fused-Ring Nonfullerene Acceptor for Highly Sensitive Self-Powered Near-Infrared Organic Photodetectors

Ultraviolet–visible photodetectors based on surface plasmon-polymer coupled inorganic/organic thin film heterojunction

Donor–Acceptor Conjugated Polymers for Single-Component Near-Infrared II Organic Phototransistors with Ultrahigh Photoresponsivity

Solution‐Grown Organic Single‐Crystal Field‐Effect Transistors with Ultrahigh Response to Visible‐Blind and Deep UV Signals

Ultra-narrow Bandgap Electron Acceptor with Low Reorganization Energy and Refined Crystallization Enables Efficient Self-Powered Photodetectors with Spectral Response over 1100 Nm

Ultrasensitive UV Photodetector Based on Interfacial Charge-Controlled Inorganic Perovskite–Polymer Hybrid Structure