Abstract:Inverted polymer solar cells (PSCs) with high open-circuit voltages of 1.00-1.06 V are fabricated by using an indenofluorene-containing copolymer (PIFTBT8) as an electron donor material and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as an electron acceptor material. To improve the photovoltaic performance, interface control of various low-temperature processed ZnO films as cathode buffer layers is systematically investigated for effective electron transportation, while transition metal oxides including MoO3, WO3, NiO, and Cu2O are employed as anode buffer layers for hole-extraction. Incorporation of optimized semiconducting metal oxide interlayers can minimize interfacial power losses, which thus affords large open-circuit voltages (V-oc), increased short-circuit current densities (J(sc)), and fill factors (FF), eventually contributing to higher power conversion efficiencies (PCEs) as well as better device stability. Due to the improved interfacial contacts and fine-matching energy levels, inverted PSCs with a device configuration of ITO/ZnO/PIFTBT8:PC71BM/MoO3/Ag exhibit a high PCE of 5.05% with a large V-oc of 1.04 V, a J(sc) of 9.74 mA cm(-2), and an FF of 50.1%. For the single junction inverted PSCs with efficiencies over 5.0%, 1.04 V is the largest V-oc ever achieved. By controlling the processing conditions of the active layer, the V-oc can further be improved to 1.05 and 1.06 V, with PCEs of 4.70% and 4.18%, respectively. More importantly, the inverted PSCs are ascertained to maintain a PCE of 4.55% (>90% of its initial efficiency) and a V-oc, of 1.05 V over 180 days, demonstrating good long-term stability, which is much better than that of the conventional devices. The results suggest that the interface engineering of metal oxide interlayers is an important strategy to develop PSCs with good performance.

A reduced electron-extraction barrier at an interface between a polymer poly(3-hexylthiophene) layer and an indium tin oxide layer

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells.

Charge Dynamics in Solar Cells with a Blend of Π-Conjugated Polymer-Fullerene Studied by Transient Photo-Generated Voltage

Flexible inverted polymer solar cells with an indium-free tri-layer cathode

Antimony doped Tin Oxide/Polyethylenimine Electron Selective Contact for reliable and light soaking-free high Performance Inverted Organic Solar Cells

Interface Control of Semiconducting Metal Oxide Layers for Efficient and Stable Inverted Polymer Solar Cells with Open-Circuit Voltages over 1.0 Volt

The Influence of Indium Tin Oxide Deposition on the Transport Properties at InP Junctions

Electrical, optical and structural characterization of interfaces containing poly(3-alkylthiophenes)(P3ATs) and polydiphenylamine on ITO/TiO2: Interaction between P3ATs polymeric segments and TiO2

Transient Extraction of Holes and Electrons Separately Unveils the Transport Dynamics in Organic Photovoltaics

Understanding the PEDOT:PSS, PTAA and P3CT-X Hole-Transport-Layer-Based Inverted Perovskite Solar Cells

Suppressing Trap‐Assisted Nonradiative Recombination via Interface Modification for Achieving Efficient Organic Solar Cells

Reducing Depletion Region Width at Electrode Interface via a Hole‐transport Layer for Over 18% Efficiency in Organic Solar Cells

Mitigated Front Contact Energy Barrier for Efficient and Stable Perovskite Solar Cells

Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether As an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction.

Large Active Area Inverted Tandem Polymer Solar Cell with High Performance Via Alcohol Treatment on the Surface of Bottom Active Layer P3HT:ICBA

Charge Transport Properties of Low Temperature Solution Processable Poly(3-Hexylthiophene)/Surface Modified Tio2 Bulk Heterojunction Systems

The Dissociation of Excitons at Indium Tin Oxide-Copper Phthalocyanine Interface in Organic Solar Cells

Triarylphosphine Oxide as Cathode Interfacial Material for Inverted Perovskite Solar Cells

Effect of Electron Collecting Metal Oxide Layer in Normal and Inverted Structure Polymer Solar Cells