Abstract:The Ba-CMK-3(x) (x was the Ba(NO3)2:CMK-3 mass ratio and equals to 5, 10, and 15 wt%) samples were prepared by the incipient impregnation method, which were used for the adsorption of NO + O2 at room temperature. The samples were characterized by the XRD, BET, TEM, TPD, TG, and DRIFTS techniques. The results showed that the CMK-3 and Ba-CMK-3(x) samples possessed an ordered two-dimensional hexagonal mesoporous structure, and Ba was uniformly dispersed on the surface of CMK-3. After Ba doping, the surface areas and pore size distributions of the Ba-CMK-3(x) samples were altered due to the synergistic effect of partial blocking of the channels by Ba and partial etching of the carbon materials by O2 produced from Ba(NO2)3 decomposition at high temperatures. The sequence in NO adsorption capacity was Ba-CMK-3(10) (108.1 ± 0.55 mg/g) > Ba-CMK-3(15) (106.2 ± 0.72 mg/g) > Ba-CMK-3(5) (102.3 ± 1.33 mg/g) > CMK-3(88.8 ± 1.15 mg/g), with the Ba-CMK-3(10) sample showing the best (NO + O2) adsorption performance. We proposed the two main adsorption pathways in the process of NO adsorption: (i) NO reacted with O2 to form NO2, part of NO2 were weakly adsorbed on the surface hydroxyl groups, part of NO2 were adsorbed to form the nitrite and nitrate species, and the left NO2 was disproportionated to the NO, NO2−, and NO3− species; and (ii) NO was directly oxidized to the NO2− species by the oxygen-containing functional groups in carbon, and then some of the NO2− species were transformed to the NO3− species directly or via disproportionation. The regeneration efficiencies of the Ba-CMK-3(x) samples were slightly inferior to that of the CMK-3 sample.

A High Effective Adsorbent of NOx: Preparation, Characterization and Performance of Ca-beta Zeolites

Adsorption-Oxidation Reaction Mechanism of NO on Na-ZSM-5 Molecular Sieves with a High Si/Al Ratio at Ambient Temperature

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Study on Preparation and Characterization of Nano-Ca(OH)2 and Its Adsorption Performance to NOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

Oxidative adsorption mechanism-based screening of zeolites for deep purification and recycling of NOx from humid gases

Efficient abatement of NOx emitted from automotive engines via adsorption on the Ba-CMK-3 adsorbents

Enhancement of NOx adsorption performance on zeolite via a facile modification strategy

Effects of Si/Al Ratio on Passive NOx Adsorption Performance over Pd/Beta Zeolites

Superior performance in passive NOx adsorption over an Al-rich Beta zeolite supported palladium

An Assessment of Zeolite Framework Effect for Low-Temperature NOX Adsorbers

Adsorption of NO on ordered mesoporous carbon and its improvement by cerium

Potassium-modified ordered mesoporous carbon materials (K-CMK-3): Highly efficient adsorbents for NO adsorption at low temperatures

Investigation of Ce/BEA as a passive NO x adsorber: 1. The occurrences of cerium and adsorption behavior

Amino-acid modulated hierarchical In/H-Beta zeolites for selective catalytic reduction of NO with CH4 in the presence of H2O and SO2

Unexpected Low Temperature Activity with Low N2 O Emission of Stabilized Al-rich Zeolite Beta for Selective Catalytic Reduction of NOx

Efficient nitric oxide capture and reduction on Ni-loaded CHA zeolites

Adsorption of nitrogen oxides by the moisture-saturated zeolites in gas stream.

A Novel Material for Passive NOx Adsorber: Ce-based BEA Zeolite

Correlation between zeolitic particle size and the low-temperature NOx storage capacity of Pd/ZSM-11 passive NOx adsorber