Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Interfacial compatibility of gel polymer electrolyte and electrode on performance of Li-ion battery

Effects of PDMS with Polyether Side Chains on the Fluoropolymer Based Gel Lithium Electrolytes

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

High Electrochemical Stability of a 3D Cross-Linked Network PEO@nano-SiO2 Composite Polymer Electrolyte for Lithium Metal Batteries

In situ prepared nano-crystalline TiO2–poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries

Achieving High Performance of Lithium Metal Batteries by Improving the Interfacial Compatibility between Organic and Inorganic Electrolytes Using a Lithium Single-Ion Polymer

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Polyvinylidene fluoride gel‐polyethylene composite separator optimizing the interface compatibility between the separator and the electrode

Dendritic mesoporous silica composite ionic liquid gel polymer electrolyte improves the performance of lithium battery

Dispersibility of nano-TiO2on performance of composite polymer electrolytes for Li-ion batteries

The critical role of in-situ lithium fluoride in gel polymer electrolyte for high-performance rechargeable batteries

Interfacial performance evolution of ceramics-in-polymer composite electrolyte in solid-state lithium metal batteries

Surface modification strategies for an improved interfacial compatibility between LLZO and a polymer substrate for applications in high-performance solid-state Li-metal batteries

Nanocomposite Polymer Membrane Derived From Nano Tio2-Pmma And Glass Fiber Nonwoven: High Thermal Endurance And Cycle Stability In Lithium Ion Battery Applications

Excellent Performances of Composite Polymer Electrolytes with Porous Vinyl-Functionalized SiO2 Nanoparticles for Lithium Metal Batteries

Preparation and characterization of gel polymer electrolyte based on porous poly(methyl methacrylate) and poly(vinylidene fluoride) films for lithium ion batteries

Novel preparation of nanocomposite polymer electrolyte and its application to lithium polymer batteries

Cathode/gel polymer electrolyte integration design based on continuous composition and preparation technique for high performance lithium ion batteries

Preparation and Performances of A Novel Gel Polymer Electrolyte

Functionalized gel polymer electrolyte membrane for high performance Li metal batteries

Unlocking Mechanism of Anion and Cation Interaction on Ion Conduction of Polymer Based Electrolyte in Metal Batteries