Abstract:Hydrotreating is one of the largest processes used in a refinery to improve the quality of oil products. The great demand of the present is to develop more active catalysts which could improve the energy efficiency of the process when it is necessary for heavier feedstock to be processed. Unsupported catalysts could solve this problem, because they contain the greatest amount of sulfide active sites, which significantly increase catalysts' activity. Unfortunately, most of the information on the preparation and properties of unsupported catalysts is devoted to powder systems, while industrial plants require granular catalysts. Therefore, the present work describes a method for the preparation of granular Ni—Mo—W unsupported hydrotreating catalysts and studies the influence of the Ni/Mo/W atomic ratio on their properties. Catalysts have been prepared by plasticizing Ni—Mo—W precursor with aluminum hydroxide followed by granulation and drying stages. Ni—Mo—W precursor and granular catalysts were studied by X-ray diffraction (XRD), nitrogen adsorption–desorption method, high-resolution transmission electron microscopy (HRTEM), and thermal analysis. Granular catalysts were sulfided through a liquid-phase sulfidation procedure and tested in hydrotreating of straight-run vacuum gasoil. It was shown that the Ni/Mo/W atomic ratio influenced the formation and composition of active compounds and had almost no influence on the textural properties of catalysts. The best hydrodesulfurization (HDS) activity was obtained for the catalyst with Ni/Mo/W ratio—1/0.15/0.85, while hydrodenitrogenation (HDN) activity of the catalysts is very similar.

Progresses in Unsupported Hydrotreating Catalysts

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Study on High-Performance Unsupported Ni–Mo–W Hydrotreating Catalyst

Development and Commercial Application of High Efficiency Catalysts for Resid Hydrotreating

Preparation and Catalytic Performance of Metal Phosphide Hydrotreating Catalysts

Unsupported Ni—Mo—W Hydrotreating Catalyst: Influence of the Atomic Ratio of Active Metals on the HDS and HDN Activity

Metal Phosphides as High-performance Hydrotreating Catalysts

Progress of Catalysts for Deep Hydrodesulfurization of Fuels

Research Advances in Unsupported Pt-based Catalysts for Electrochemical Methanol Oxidation

Modification of the active phase structure of residue hydrogenation catalyst and its catalytic performance

Preparation and Catalytic Performance of Transition Metal Phosphides

Research and Development of Petroleum Hydrodesulfurization Catalysts with Al2O3-based Supports

Advanced design and development of catalysts in propane dehydrogenation

Recent Advances on Heterogeneous Non-noble Metal Catalysts toward Selective Hydrogenation Reactions

Recent development of transition metal doped carbon materials derived from biomass for hydrogen evolution reaction

Development and commercial application of catalysts for resid hydrotreating technology (RHT)

Supported catalysts based on layered double hydroxides for catalytic oxidation and hydrogenation: general functionality and promising application prospects

Unlocking the catalytic potential of heterogeneous nonprecious metals for selective hydrogenation reactions

Development of Efficient Catalysts for Selective Hydrogenation Through Multi-Site Division

Progress in Preparation and Research of Water Electrolysis Catalyst for Transition Metal Phosphide

Development of New Generation Catalysts for Selective Hydrodesulfurization of Fcc Naphtha