Abstract:The molecular topology of amine curing agents is expected to greatly affect the curing reaction and properties of the epoxy resins, yet the exact influence still remains little understood. Herein we find out two representative aliphatic amines: linear propanediamine (PDA) and branched N,N,N′,N′-tetra(3-aminopropyl)-1,3-propanediamine (TAPA), and use them to cure diglycidyl ether of bisphenol A (DGEBA). The curing reaction, dynamic mechanical properties, and thermal stability of DGEBA/PDA and DGEBA/TAPA are systematically investigated and compared. Differential scanning calorimetry (DSC) confirms TAPA and PDA have very close reactivity much higher than that of commercial Jeffamine T-403 with the branched molecular structure. The curing kinetic analysis shows TAPA causes the higher isothermal conversion at the lower temperature (e.g., 40°C), the autocatalysis and diffusion-associated kinetics feature the isothermal reactions, and the extended Kamal model turns out to be able to well predict the curing rate. Then, the isoconversional analysis with the Vyazovkin methods demonstrates compared to PDA, TAPA leads to the lower effective activation energy at the very beginning due to its catalytic tertiary amino groups, but the reversed trend emerges in the deep-conversion stage, especially, in the glass-transition regime, owing to its flexible aliphatic molecular chains. Furthermore, the isothermal conversion at the higher temperatures is predicted from the nonisothermal experiments. Finally, dynamic mechanical analysis (DMA) shows cured DGEBA/TAPA exhibits the higher glass- and β-relaxation temperatures and crosslink density than DGEBA/PDA, and thermogravimetric analysis (TGA) reveals TAPA-cured epoxy has the excellent thermal stability with the higher char yield.

Electrical Property Improvement of Dicyandiamide-Cured Electrically Conductive Adhesives Through In-Situ Replacement by Difunctional Acids and the Impact on Storage

Study on the Effects of Adipic Acid on Properties of Dicyandiamide-Cured Electrically Conductive Adhesive and the Interaction Mechanism

Electrical Property of Electrically Conductive Adhesives Filled with Micro-Sized Ag Flakes and Modified by Dicarboxylic Acids

Branched 1,6-Diaminohexane-derived Aliphatic Polyamine As Curing Agent for Epoxy: Isothermal Cure, Network Structure, and Mechanical Properties

The Interaction Mechanism of Dicarboxylic Acids and Electrically Conductive Adhesives

Simultaneously Improving Electrical Properties and Stabilizing Contact Resistance of Electrically Conductive Adhesives by Using Aminoaldehydes

A Comparative Study of Epoxy Resin Cured with a Linear Diamine and a Branched Polyamine

Surface Functionalization of Micrometer Silver Flakes for Fabricating High-Performance Electrically Conductive Adhesives

Electrical property enhancement of electrically conductive adhesives through Ag-coated-Cu surface treatment by terephthalaldehyde and iodine

Study of Surface Treatment of Copper Fillers for Improvement of Electrically Conductive Adhesives

Study on Stabilizing Contact Resistance of Electrically Conductive Adhesives by In-Situ Replacement Method

A study on the resistivity and mechanical properties of modified nano-Ag coated Cu particles in electrically conductive adhesives

The Sintering Behavior of Electrically Conductive Adhesives Filled with Surface Modified Silver Nanowires

Improvement in the Thermal Conductivity of Silver Epoxy Adhesive by Treating with Water Vapor

The Effect of Functionalized Silver on Rheological and Electrical Properties of Conductive Adhesives

Influence of Curing Procedures on the Electrical Properties of Epoxy-Based Isotropic Conductive Adhesives

Effect of Curing Procedures on the Electrical Properties of Epoxy-Based Isotropic Conductive Adhesives

Mechanical Strength and Tribological Properties of Diglycidyl Ether of Bisphenol-A Cured by Poly(Amide-Amidic Acid) and 4,4 '-Diaminodiphenylsulfone

Silver Flakes and Silver Dendrites for Hybrid Electrically Conductive Adhesives with Enhanced Conductivity

Surface Treatment of Micron Silver Flakes with Coupling Agents for High-Performance Electrically Conductive Adhesives

Electrical and Mechanical Reliability and Failure Mechanism Analysis of Electrically Conductive Adhesives