Abstract:Abstract This study aims to investigate the diffusion stabilization process of nano-Co 2 O 3 during the non-precursor transformation of 3Y-TZP. 3Y-TZP was set as the control group, and the experimental groups were 0.1–0.3 mol% nano-Co 2 O 3 -doped 3Y-TZP. The samples were prepared by the ball milling process, isostatic cool pressing, and sintering. All samples were hydrothermally treated at 134°C and 2 bar for different time periods. The resistance to low-temperature degradation of nano-Co 2 O 3 -doped 3Y-TZP was analyzed by X-ray diffraction. The microstructure of zirconia ceramic samples was determined by scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and electron paramagnetic resonance studies. The addition of nano-Co 2 O 3 into 3Y-TZP resulted in higher hydrothermal aging resistance than 3Y-TZP. The addition of 0.2 mol% nano-Co 2 O 3 dopants resulted in the highest hydrothermal aging resistance among nano-Co 2 O 3 -doped 3Y-TZP ceramics. The grain sizes of 3Y-0.2Co are smaller than those in the control group. With the increase of cobaltous oxide doping contents, the segregation of Co 3+ ions at the crystal boundary increased. The content of oxygen vacancies on the surface of the sample increased with the increase of the Co 2 O 3 doping content. The oxygen vacancy concentrations of 3Y-0.2Co increased obviously after aging. 3Y-0.1Co, 3Y-0.3Co, and the control showed decreased oxygen vacancy concentrations after aging. Trivalent element doping of 3Y-TZP effectively improved the aging resistance of 3Y-TZP. The addition of 0.2 mol% nano-Co 2 O 3 resulted in the highest hydrothermal aging resistance. Improved aging resistance is attributed to the nano-Co 2 O 3 doping resulting in the 3Y-TZP grain size inhibition, grain boundary segregation of cobalt ions, and oxygen vacancy maintenance. This work is expected to provide an effective reference for the development and application of budget dental materials by regulating grain boundary engineering.

Low Temperature Degradation of Al2O3-doped 3Y-TZP Sintered at Various Temperatures

[Study on Low Temperature Degradation of Dental Zirconia Ceramic].

Effect of Al2O3 on Degradation of 3Y-TZP Ceramics at Low Temperature

Effects Of Sintering Temperature On Degradation Of Al2o3-Y-Ce-Tzp Ceramics At Low Temperature

HfO2 doped 3Y-TZP on mechanical properties and low temperature degradation (LTD)

Mechanical properties of low-temperature sintered Al2O3/3Y-TZP composites

Low Temperature Aging Effects of Y_2O_3 Stabilized Tetragonal Zirconia Polycrystals Ceramics in Acidic Environment

Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature

Mechanical properties and low temperature degradation (LTD) of cation-stabilized zirconia

Evaluation of Feasibility on Dental Zirconia-Accelerated Aging Test by Chemical Immersion Method

Effect of Aging Time and Thickness on Low-Temperature Degradation of Dental Zirconia.

Accelerated Aging in 3 mol%-Yttria-Stabilized Tetragonal Zirconia Ceramics Sintered in Reducing Conditions

Effects of Low-Temperature Aging on Mechanical Properties of Two Kinds of Dental Zirconia Ceramics

Mechanical, low temperature degradation, and biocompatibility of Al-doped dental 3Y-TZP ceramic

Effects of Low Temperature Degradation on Zirconia Ceramic(px-242A)

Effect of grain boundary segregation and oxygen vacancy annihilation on aging resistance of cobalt oxide-doped 3Y-TZP ceramics for biomedical applications

Microstructural dependence of aging induced phase transformation in Y2O3 partially stabilized ZrO2 polycrystals

The Study on Degradation of Y<sub>2</sub>O<sub>3</sub>-CeO<sub>2</sub>-Partially Stabilized ZrO<sub>2</sub> Adding Al<sub>2</sub>O<sub>3</sub> Particles at Low Temperature

Low Temperature Degradation Properties Comparison of Four Kinds of Y-TZP Ceramics

Mechanical and Wear Properties of Low-Temperature-Sintered 3Y-TZP Ceramics

Influence of Sintering Process and Coloring Agents on Aging Properties of Dental Zirconia Ceramics