Abstract:Development of proton exchange membranes (PEMs) with low methanol permeability and high ionic conductivity is an effective way to improve the lifespan and power density of direct methanol fuel cells (DMFCs). Here, we report a novel phosphoric acid (PA)-doped quaternary ammonium ion-modified poly (vinylidene fluoride) nanofiber composite PEM (QA@PVDF/SPEEK-PA) for DMFCs. Benefiting from the rich acid-base ion-pair interface (–NH 2 /-N(CH 3 ) 3 + and −SO 3 H/H 2 PO 4 - ) constructed within the membrane, QA@PVDF/SPEEK-PA exhibited an ultrahigh conductivity of up to 202.31 mS cm −1 at 80 °C, corresponding to 2.6 and 1.31 times the conductivity of SPEEK (77.8 mS cm −1 ) and commercial Nafion 211 (154.03 mS cm −1 ), respectively. More importantly, the introduction of 3D nanofibers within the membrane together with the formation of acid-base interactions led to the excellent methanol barrier effect over a wide methanol range. Even with a 10 M CH 3 OH fuel, the cross-current density of methanol remained at a mere 161.21 mA cm −2 , while the open-circuit voltage (OCV) of the fuel cell reached an impressive 0.73 V. The DMFC assembled with the membrane exhibited a peak power density (PPD) of 121.38 mW cm −2 , representing a 1.36-fold relative to that of Nafion 211. After 260 h of in-situ durability test, the OCV was reduced by only 7.49 %. These excellent results suggest that the PA-doped nanofiber composite PEMs are promising candidates for future DMFCs applications.

An alkaline direct methanol fuel cell with a polymer fiber membrane and MnO2-catalyzed cathode

A Direct Methanol Fuel Cell Without the Use of a Polymer Electrolyte Membrane or Precious Metal Cathode Catalyst

A high-performance direct methanol fuel cell with a polymer fiber membrane and RuO2/CNTs as a cathode catalyst

High-Performance Polymer Fiber Membrane Based Direct Methanol Fuel Cell System with Non-Platinum Catalysts

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

A Micro Passive Direct Methanol Fuel Cell with High Performance Via Plasma Electrolytic Oxidation on Aluminum-Based Substrate

A Direct Borohydride Fuel Cell with a Polymer Fiber Membrane and Non-Noble Metal Catalysts.

A Neat Methanol Fed Passive DMFC with a New Anode Structure

Enhanced performance of a direct methanol alkaline fuel cell (DMAFC) using a polyvinyl alcohol/fumed silica/KOH electrolyte

A feasibility analysis for alkaline membrane direct methanol fuel cell: thermodynamic disadvantages versus kinetic advantages

High-Performance Direct Methanol Fuel Cells with Precious-Metal-Free Cathode.

High-performance direct methanol alkaline fuel cells using potassium hydroxide-impregnated polyvinyl alcohol/carbon nano-tube electrolytes

Development of MEMS-based direct methanol fuel cell with high power density using nanoimprint technology

Novel Anode Electrode Structure with a Fuel Management Layer for High-Concentration Passive Direct Methanol Fuel Cells

Critical materials and technology in direct methanol fuel cells

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

Highly durable direct methanol fuel cell with double-layered catalyst cathode

PA-doped nanofiber composite proton exchange membranes with ultrahigh proton conductivity and methanol barrier performance for direct methanol fuel cells

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Grafted polymer electrolyte membrane for direct methanol fuel cells