Abstract:The elevated temperature resistance and fire resistance of carbon fiber-reinforced polymer (CFRP) composites are a critical concern for many applications. The mechanical properties of carbon fiber at elevated temperatures play a crucial role on the mechanical property of CFRP. In many cases, carbon fiber may not directly exposed to air due to the coverage of resin matrix or coatings at elevated temperatures. In the present paper, exposure at 400-700 degrees C for 30 min, or at 500 degrees C for 30 min similar to 10 h in argon was simulated in the above case for carbon fibers. The evolution of chemical structural and mechanical properties of carbon fibers at elevated temperatures was investigated. It was found that the tensile strength of the carbon fibers was reduced remarkably, and the tensile modulus was not sensitive to the elevated temperature exposure. Decrease in the shape parameter of carbon fiber after exposure indicated the increase in defects and disordering. Furthermore, elevated temperature exposure does not significantly change the fiber mass, C-C skeleton and graphite crystallite size. However, the micropore size and graphite interlayer spacing increased obviously, leading to the weakened lateral cross-linking between the graphite layers. Finally, the evolution of the tensile strength with the exposed temperatures and time was discussed quantitatively. The contribution factors of van der Waals and amorphous carbon on the tensile strength were found to be 75 and 25%, respectively.

Interface evolution of the Cf/leucite composites derived from Cf/geopolymer composites

Effects of high-temperature heat treatment on the mechanical properties of unidirectional carbon fiber reinforced geopolymer composites

Effect of Heat Treatment on Mechanical Properties of Unidirectional Carbon Fiber Reinforced Geopolymer Composites

Preparation of fully stabilized cubic-leucite composite through heat-treating Cs-substituted K-geopolymer composite at high temperatures

Effects of high-temperature heat treatment on the microstructure and mechanical performance of hybrid Cf-SiCf-(Al2O3p) reinforced geopolymer composites

Effect of High Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer Composite

Effect of Thermal Exposure on the Microstructure of the Interface in a Grf/Al Composite

Thermal-mechanical Properties of Short Carbon Fiber Reinforced Geopolymer Matrix Composites Subjected to Thermal Load

In situ processing of MWCNTs/leucite composites through geopolymer precursor

Effect Of Thermal Exposure On The Microstructure Of The Interface In A Gr(F)/Al Composite

Preparation and characterization of Cf/Pollucite composites through geopolymer precursors

Improvement of High-Temperature Mechanical Properties of Heat Treated Cf/geopolymer Composites by Sol-SiO2 Impregnation

Preparation and in-situ high-temperature mechanical properties of Cf-SiCf reinforced geopolymer composites

Temperature-Dependent Interfacial Debonding and Frictional Behavior of Fiber-Reinforced Polymer Composites

Influence of Elevated Temperature Treatment on the Microstructures and Mechanical Properties of Carbon Fibers in Argon Environment

Effect of Fiber Characteristics on Fracture Behavior of C F /sic Composites

Design of carbon fiber with nano accuracy for enrichment interface

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

Microstructure and Integrity of Leucite Ceramic Derived from Potassium-Based Geopolymer Precursor

Effect of high temperature heating on the microstructure and performance of cesium-based geopolymer reinforced by cordierite

Effect of heat treatment on the microstructure and properties of CVD SiC fiber