Abstract:In this work, a poly(dimethylsiloxane) (PDMS) microchip-based immuno-sensing platform with integrated pneumatic micro valves is described. The microchip was fabricated with multiple layer soft lithography technology. By controlling the activation status of corresponding valves, reagent flows in the microchannel network can be well manipulated so that immuno-reactions only take place at designated reaction zones (DRZs). Four DRZs are included in the prototype microchip. Since these DRZs are all isolated from each other by micro valves, cross contamination is prevented. Using the inner surface of the all-PDMS microchannel as immunoassay substrate, on-chip sandwich format solid phase immunoassay was performed to demonstrate the feasibility of this immuno-sensing platform. Mouse IgG and fluorescein isothiocyanate (FITC) were used as the model analyte and the signal reporter respectively. Only 10μl sample is needed for the assay and low detection limit of 5ng/ml (≈33pM) was achieved though low-cost polyclonal antibodies were used in our experiment for feasibility study only. Much lower detection limit may easily be achieved by using high quality monoclonal antibodies. Through a simple yet effective comparison experiment, it was also found that high concentration BSA blocking solution (5% BSA in PBS buffer) can effectively suppress the non-specific binding in the surface of the microfluidic channels. The encouraging results from mouse IgG immunoassay proved the feasibility of our microchip design. With slight modification of the assay protocol, the same chip design can be used for multi-target detection and can provide a simple, cost-effective and integrated microchip solution for multiplex immunoassay applications.

Integrated Dual Grating Polymer Microbeams for Bio-Chemical Sensing in Liquid Environment

Modulation of the Dual Resonant Peaks of a Long-Period Fiber Grating Towards Highly Sensitive Sensing by Means of Polymeric Nanocoatings for Biosensing Applications

Protein Determination with Molecularly Imprinted Polymer Recognition Combined with Birefringence Liquid Crystal Detection

A Polyethylene Glycol (peg) Microfluidic Chip with Nanostructures for Bacteria Rapid Patterning and Detection

Polymer Waveguide Sensor Based on Evanescent Bragg Grating for Lab-on-a-Chip Applications

Optofluidic Chip with Directly Printed Polymer Optical Waveguide Mach-Zehnder Interferometer Sensors for Label-Free Biodetection

Nanoporous Polymeric Grating-Based Biosensors

Fabrication of Quantum Dots-Encoded Microbeads with A Simple Capillary Fluidic Device and Their Application for Biomolecule Detection

Unveiling the Potential of Polymer Cholesteric Liquid Crystal Interpenetrating Networks as a Label-Free Alcohol Biochemical Sensor

Highly Sensitive Refractive Index Sensor Based on Polymer Long-Period Waveguide Grating with Liquid Cladding

A polymer-based microfluidic device for immunosensing biochips

A novel micromachined Fabry-Perot interferometer integrating nano-holes and dielectrophoresis for enhanced biochemical sensing

Molecularly Imprinted Polymer-Coated Optical Waveguide for Attogram Sensing

A dynamically modified microfluidic poly(dimethylsiloxane) chip with electrochemical detection for biological analysis.

Integrated Optical Readout Using a Hybrid Plasmonic Directional Coupler in Water.

Dual optofluidic distributed feedback dye lasers for multiplexed biosensing applications

Dynamic and Label-Free High-Throughput Detection of Biomolecular Interactions Based on Phase-Shift Interferometry

Polymer Integrated Waveguide Optical Biosensor by Using Spectral Splitting Effect

Integrated Microfluidic Spectroscopic Sensor Using Arrayed Waveguide Grating

Poly(Dimethylsiloxane) Microchip-Based Immunoassay with Multiple Reaction Zones: Toward On-Chip Multiplex Detection Platform

Fluorescence enhanced biomolecule detection using direct laser written micro-ring resonators