Abstract:The slow light sensor techniques have been applied to bio-related detection in the past decades. However, similar testing-systems are too large to carry to a remote area for diagnosis or point-of-care testing. This study demonstrated a fully automatic portable biosensing system based on the microring resonator. An optical-fiber array mounted on a controller based micro-positioning system, which can be interfaced with MATLAB to locate a tentative position for light source and waveguide coupling alignment. Chip adapter and microfluidic channel could be packaged as a product such that it is cheap to be manufactured and can be disposed of after every test conducted. Thus, the platform can be more easily operated via an ordinary user without expertise in photonics. It is designed based on conventional optical communication wavelength range. The C-band superluminescent-light-emitting-diode light source couples in/out the microring sensor to obtain quasi-TE mode by grating coupler techniques. For keeping a stable chemical binding reaction, the cost-effective microfluidic pump was developed to offer a specific flow rate of 20 μL/min by using a servo-motor, an Arduino board, and a motor driver. The subwavelength grating metamaterial ring resonator shows highly sensitive sensing performance via surface index changes due to biomarker adhered on the sensor. The real-time peak-shift monitoring shows 10 μg/mL streptavidin detection of limit based on the biotin-streptavidin binding reaction. Through the different specific receptors immobilized on the sensor surface, the system can be utilized on the open applications such as heavy metal detection, gas sensing, virus examination, and cancer marker diagnosis.

Fluorescence enhanced biomolecule detection using direct laser written micro-ring resonators

Ultra-Sensitive Nanofiber Fluorescence Detection In A Microfluidic Chip

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Polymer Microring Resonators for Biosensing Applications by Nanoimprint Lithography

Biochemical sensors based on polymer microrings with sharp asymmetrical resonance

Optical Biosensors Utilizing Polymer-Based Athermal Microring Resonators

An integrated, optofluidic system with aligned optical waveguides, microlenses, and coupling prisms for fluorescence sensing

Cascaded-Microrings Biosensors Fabricated On A Polymer Platform

A Low Cost Photonic Biosensor Built on a Polymer Platform

BIOSENSOR BASED ON FLUORESCENT SPHERICAL RESONATOR USING POLYSTYRENE MICROBEAD

Label-Free Biosensing Using A Microring Resonator Integrated With Poly-(Dimethylsiloxane) Microfluidic Channels

Portable Automatic Microring Resonator System Using a Subwavelength Grating Metamaterial Waveguide for High-Sensitivity Real-Time Optical-Biosensing Applications

Femtosecond Laser Fabrication of a Lab-on-a-Chip in Glass for Enhancing Detection Sensitivity

Integrative Optofluidic Microcavity with Tubular Channels and Coupled Waveguides Via Two-Photon Polymerization

Micro-cavity fabricated by femtosecond lasers and its application in fiber-loop ring-down spectroscopy

Polymer-Based Microring Resonator with the Multimode Interference Coupler Operating at Very-Near-Infrared Wavelengths

Fluorescence Enhanced Lab-on-a-chip Patterned Using a Hybrid Technique of Femtosecond Laser Direct Writing and Anodized Aluminum Oxide Porous Nanostructuring

Microfluidic Raman Sensing Using a Single Ring Negative Curvature Hollow Core Fiber

A universal biosensing platform based on optical micro-ring resonators.

On-Chip Biological and Chemical Sensing with Reversed Fano Lineshape Enabled by Embedded Microring Resonators

Dual optofluidic distributed feedback dye lasers for multiplexed biosensing applications