Abstract:Introduction: A large number of the current guidelines and models are used to estimate the right-turn lane (RTL) length in left-hand traffic at signalised intersections under split phase, in which the movement of traffic in the right-turn lane and through lane happen concurrently. There is a need to examine other phase types and timings as a part of the RTL design. This is particularly significant in the case of established intersections that cannot be modified due to physical constraints. Methods: A MATLAB based simulation programme was developed to provide an estimate of the right-turn lane storage length for different traffic volumes in order to avoid the problems associated with blockage and overflow of the right turn vehicles in 95% of the traffic signal cycles. The model enhances flexibility when dealing with the complexity of the design of the storage length taking into account different signal phases and timings to overcome the aforementioned problems. The simulation model also takes into consideration the left-over queue from the previous cycle which was ignored by most of the previous studies. Results and Conclusion: The model input includes as a configuration matrix containing the sequence of operational states of the intersection. This ensures the flexibility and the simplicity of manipulating the data to reflect all phase types and timings. The model results have been compared against a recently developed analytical model in which similar signal phases and timings were investigated. The outcomes agree to the results that are obtained from the analytical model in most of the signal phases. The developed simulation model is flexible enough to be used further to simulate the situation when there is a large difference between the approaching and opposing traffic volumes and optimise the green time in case of split phase. In this study, the simplified simulation model for estimating the RTL storage length has been developed for the left-hand traffic countries; however, the study is equally applicable to the left-turn lane (LTL) in right-hand traffic countries.

Simulation-Based Comprehensive Evaluation of Left-Turn-Waiting Zone at Signalized Intersection with Separated Left Turn Phases

Analysis om waiting area for left-turn vehicles at signalized intersections

Evaluating the traffic safety performance of left-turn waiting areas at signalized intersections

Traffic Performance in Signalized Intersection with Shared Lane and Left-Turn Waiting Area Established

Critical Condition for Setting Left-turn Waiting Area

Modeling Capacity of Shared Right-Turn Lanes at Signalized Intersections Considering the Lag Green Time of Right-Turns

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Analysis of a Signalized Intersection with Dynamic Use of the Left-Turn Lane for Opposite through Traffic

Multi-phase Signalized Intersection Optimization Based on Lane Sharing

Traffic Wave Models for the Urban Road with a Work Zone

VISSIM-Based Simulation Approach to Evaluation of Design and Operational Performance of U-turn at Intersection in China

Analysis of Signalized Intersection U-Turn Design Based on the Micro-Simulation Study

Planning methods and effect analysis of advance right-turn

A Simplified Simulation Model to Estimate the Storage Length of the Right-Turn Lane in Left-Hand Traffic at Signalised Intersections for Different Signal Phases and Cycle Timings

Left-Turn Lane Capacity Estimation based on the Vehicle Yielding Maneuver Model to Pedestrians at Signalized Intersections

Method of computing left-turn vehicle traffic capacity at two-phase intersection

Comparing Roundabouts and Signalized Intersections Through Multiple-Model Simulation

Shared-use lane assignment and signal timing optimization at intersections with waiting area

Calculation method of travel time of right-turn vehicle at motor-and nonmotor-vehicle mixed traffic intersection

Exclusive Right-turn Phase Setting Simulation Based on Vehicle/Pedestrian Conflict Analysis

Research on the impact of U-turn location on operation efficiency at intersection