Abstract:High heat flux test facilities throughout the world performed transient heat loads testing to assess the efficiency and fatigue life of a variety of plasma-facing materials and design concepts. However, the penetration depth of the energetic particles is known to have a strong influence on the results of transient heating tests since the temperature is not in equilibrium when failures or significant events occur. Therefore we have developed a numerical approach to quantitatively investigate the thermal behavior in transient heat loads testing of plasma-facing materials. The approach is mainly based on the Monte Carlo method to simulate the trajectories of particles and the classical heat transfer model to calculate the temperature distribution inside a solid, which allows us to calculate the energy deposition distributions and the fraction of incident electron energy deposited (or the ratios of absorbed power density vs. the incident power density) in thermal materials for fusion reactor applications. In particular, the temperature distributions of plasma-facing materials of Be and W under different conditions (acceleration voltage, absorbed power density, duration time and category of material) are studied within this framework. The volumetric heating effect to the surface temperature of materials is much stronger for the low-Z materials like Be than for the high-Z materials like W, where the deviation of surface temperatures between different acceleration voltages can be up to 20% for low-Z materials. The framework of numerically simulating the mechanics for high heat flux testing of plasma-facing materials has been coded as the IRadMat package. (C) 2011 Elsevier B.V. All rights reserved.

Simulation of plasma window for gas target of neutron source

Numerical Simulation and Experimental Progress on Plasma Window

Experimental Study of the Plasma Window

Simulation of a 10 Mm Diameter Cascaded Plasma Window

Experimental study of plasma window

Numerical Simulation Study on Fluid Dynamics of Plasma Window Using Argon

Experimental studies of a novel one-dimensional plasma window

Theoretical and Experimental Investigation on Magneto-Hydrodynamics of Plasma Window

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

Demonstration of Plasma Window with 20 mm Diameter and Pressure Separation for Accelerator Applications

Simulation of High Power Thz Emission from Laser Interaction with Tenuous Plasma and Gas Targets

Multi-physics modeling of the long-term evolution of helium plasma exposed surfaces

Theoretical Simulation of Thermal Behavior in Transient Heat Loads Testing of Plasma-Facing Materials

Model Study on Laser Interaction with Near-Critical Density Plasma

Improved Model for Window Breakdown at Low Pressure

Plasma Propagation in the Microwave Window Breakdown at the Air/dielectric Interface

Simulations and experimental results for a microwave plasma system

A Dynamical Model of Microwave Window Breakdown at Vacuum/dielectric Interface

Studies on Unsteady Characteristics of Free Surface Flow in ADS Windowless Target

Quantitative Characterization of Arc Discharge As Vacuum Interface

Scattering effect in proton beam windows at spallation targets