Abstract:Surface dielectric barrier discharges (sDBD) are efficient and scalable plasma sources for plasma-based gas conversion. One prominent feature of an sDBD is the generation of an ion wind, which exerts a force on the neutrals, thus leading to an efficient mixing of plasma and a passing gas stream. This becomes apparent by the creation of upstream and downstream vortices in the vicinity of the plasma. In this study, these vortices are generated by high voltage burst pulses consisting of two half cycles of an almost sinusoidal voltage shape. The vortices are monitored by Schlieren imaging diagnostic to benchmark and connect two simulations of the sDBD: a plasma model simulating a streamer for 25 ns starting from the electrode and propagating along a dielectric surface followed by a decay. The streamer is the source of electrical charges accelerated as ion wind by the applied electric field from the sDBD power supply. A second flow simulation models this ion wind as a time-averaged thrust acting on the passing gas stream. The conversion of the time-resolved forces from the nanosecond plasma simulation into the steady state thrust in the flow simulation indicates that the force from the plasma lasts much longer than the actual streamer propagation phase. This is explained by the fact that the charges in the streamer channel remain present for almost 100 ns, and the voltage from the power supply lasts for a few microseconds being applied to the electrode so that ions in the streamer channel are still accelerated even after a streamer stops to propagate after a few ns. The thrust generated during the streamer phase, including the relaxation phase, agrees well with predictions from flow simulation. Additionally, properly converting the time-resolved forces from the plasma simulation into a time-averaged thrust for the flow simulation yields exactly the synthetic Schlieren images as measured in the experiments.

Simulation of a 10 Mm Diameter Cascaded Plasma Window

Numerical Simulation and Experimental Progress on Plasma Window

Theoretical and Experimental Investigation on Magneto-Hydrodynamics of Plasma Window

Numerical Simulation Study on Fluid Dynamics of Plasma Window Using Argon

Experimental studies of a novel one-dimensional plasma window

Simulation of plasma window for gas target of neutron source

Experimental Study of the Plasma Window

Experimental study of plasma window

Demonstration of Plasma Window with 20 mm Diameter and Pressure Separation for Accelerator Applications

Quantitative Characterization of Arc Discharge As Vacuum Interface

Numerical Simulation of Strong Evaporation and Condensation for Plasma-Facing Materials

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

Characterization of a plasma window as a membrane free transition between vacuum and high pressure

Multi-physics modeling of the long-term evolution of helium plasma exposed surfaces

Simulation and Design of New Microwae Plasma Source with Slotted Straight Waveguides

Three-Dimensional Numerical Simulation of Inductively Coupled Plasma Generator

Plasma and Flow Simulation of the Ion Wind in a Surface Barrier Discharge Used for Gas Conversion Benchmarked by Schlieren Imaging

Numerical Simulation and Experimental Validation of Pulsed Nanosecond Plasma Aerodynamic Actuation in Air Under Atmospheric Pressure

Modelling Of Plasma Aerodynamic Actuation Driven By Nanosecond Sdbd Discharge

Theoretical Simulation of Thermal Behavior in Transient Heat Loads Testing of Plasma-Facing Materials

Magnetohydrodynamic Modeling and Simulation of a Vacuum Arc Plasma Jet with a Ring Anode under Different External Magnetic Fields