Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

Filter-Antenna Consisting of Conical Fss Radome and Monopole Antenna

Design and Simulation of a Miniature Thick-Screen Frequency Selective Surface Radome

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

Design and simulation of energy selective radome integrated with monopole antenna

Design of Frequency-Selective Surfaces Radome for a Planar Slotted Waveguide Antenna

A Low-RCS and Wideband Circularly Polarized Array Antenna Co-Designed With a High-Performance AMC-FSS Radome

A Novel “Antenna-Balanced Filter-Antenna” Based Frequency Selective Surface

Implementation of a 2-D Reconfigurable Fresnel-Zone-Plate Antenna

A Novel FSS Structure with Great Insensitivity to Incident Angles for High Performance Millimeter Wave Communication Radome

An FSS-Integrated Low-RCS Radome Design

Design of a hybrid A-sandwich radome using a strongly coupled frequency selective surface element

Frequency Selective Surface with Quasi-Elliptic Bandpass Response for Filtering FRA Application

A Wideband Transmission Frequency Selective Surface Rasorber

A Conformal Miniaturized Bandpass Frequency-Selective Surface With Stable Frequency Response for Radome Applications

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

3D conformal bandpass millimeter-wave frequency selective surface with improved fields of view

Design of Dual-Band Composite Radome Wall With High Angular Stability Using Frequency Selective Surface

A Wideband Transmission Frequency Selective Surface Rasorber with Low Insertion Loss

Design of FSS Based Radome Wall for Airborne Radar Application

Broadband low radar cross section frequency selective surface radome based on phase cancellation and spatial filtering

A Novel Almost All-Angle-insensitive FSS Structure for High-Performance Radome