Abstract:This work presents a novel tri-band bandpass frequency selective surface (FSS) that achieves high-order filtering responses in different frequency bands by means of a complementary structure. The proposed FSS is composed of three metal periodic arrays, which are separated by multilayer dielectric substrates. The gridded-double convoluted loop (G-DCL) structure, which is the middle layer structure, is a hybrid resonator that generates different resonant frequencies. The top and bottom layer structures are designed as complementary structures to the middle layer. To accurately describe the frequency responses, an equivalent circuit model (ECM) has been constructed over the entire band from 0 to 16 GHz. The results of the simulation indicate that the developed FSS can generate three pass-bands operating at 3.79 GHz, 8.34 GHz, and 12.52 GHz, respectively, and − 3 dB fractional bandwidths are 52.8%, 13.7%, and 19.7%. The transmission responses at the edges of each passband show a quick roll-off from the passband to the stopband, and there is significant out-of-band suppression between adjacent passbands. Moreover, the FSS maintains excellent angular and polarization stability within a 50° range. For verification, the tri-band FSS has been fabricated and tested. The experimental results match the simulation results, validating the accuracy of the FSS design.

A Novel “Antenna-Balanced Filter-Antenna” Based Frequency Selective Surface

A Novel Dual-Band Frequency Selective Surface (FSS)

A Novel Miniaturized Dual-band Frequency Selective Surface

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Novel Angularly Stable Wide Passband Frequency Selective Surface

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

Frequency Selective Surface with Quasi-Elliptic Bandpass Response for Filtering FRA Application

Frequency Selective Surface With Quasi-Elliptic Bandpass Response Using Radiation Null of Patch Antenna

A Novel Miniaturized Strong-Coupled FSS Structure with Excellent Angular Stability

A Novel Frequency Selective Surface with Smaller Size and Wide Band

A Novel Miniaturized Aperture Hexagonal Frequency Selective Surface

A Novel 3-D Frequency Selective Surface With Ultrawide Passband and High Selectivity

A Novel Tunable Frequency Selective Surface Absorber with Dual-Dof for Broadband Applications.

A Fifth-Order X-Band Frequency Selective Surface with High Selectivity and Angular Stability Based on 3-D Coupling Slot

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green's Function Interpolation Method

Design and analysis of a complementary structure-based high selectivity tri-band frequency selective surface

A Miniaturized Ultrawideband Dual-Bandpass Frequency-Selective Surface With High Selectivity

A Multifunctional and Miniaturized Flexible Active Frequency Selective Surface

Research Progress and Application Prospects of Active Frequency Selective Surfaces

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary