Abstract:Accurate prediction of fatigue crack growth behavior is crucial to damage tolerance assessment of turbine disk. Powder nickel-based superalloy is a kind of preferred material of turbine disk. For the purpose of better understanding the characteristics of its crack growth behavior under dwell fatigue conditions at elevated temperature, dwell fatigue crack growth tests of powder nickel-based superalloy FGH96 were conducted with compliance method at three temperatures (600°C, 650°C, 700°C) and multiple dwell time conditions (from 0 s to 60 s). The results show that sustained load can accelerate fatigue crack growth rate of FGH96 significantly at high temperature, and it is more pronounced with higher temperature and prolonged dwell time. At higher ΔK level, the acceleration effect brought by sustained load seems to diminish, this is ascribed to rapid crack growth rate which leads to insufficient time for time-dependent damage occurring at crack tip zone. The effect of temperature on dwell fatigue crack growth rate is more remarkable from 650°C to 700°C, compared with that from 600°C to 650°C. The fatigue crack growth resistance of FGH96 is sensitive to sustained load at 700°C, just 1 s dwell loading can produce remarkable acceleration effect on fatigue crack growth rate. The time-dependent crack extension in a loading cycle increases with dwell time in a decelerated manner. Finally, A phenomenological-based crack growth model considering time-dependent damage was proposed, the comparation between the proposed model and the experiment data confirms that it works well for a wide range of temperature and dwell time.

Analysis Technology and Experiment for FGH96 Disc＇s LCF Life

Effect of Residual Stress Induced by Different Cooling Methods in Heat Treatment on the Fatigue Crack Propagation Behaviour of GH4169 Disc

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Study on Creep Behavior and Fracture Life Prediction Method of P92 Steel Based on Finite Element Analysis

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Combined high and low cycle fatigue analysis of FGH96 alloy under high temperature conditions

LCF life prediction of turbine disc alloy using crystal plasticity and 3D representative volume element containing twin boundaries

Experimental and Analytical Investigation for Fatigue Crack Growth Characteristics of an Aero-Engine Fan Disc

Life prediction and damage analysis of creep-fatigue combined with high-low cycle loading by using a crystal plasticity-based approach

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Zone‐based failure risk assessment of fatigue crack growth caused by initial defects in powder turbine disc

Effect of Surface Modification on the High Temperature Low Cycle Fatigue Performance of LPBF 316L Austenitic Steel

A New Energy Gradient-Based Model For Lcf Life Prediction Of Turbine Discs

Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime

Initiation and Propagation Characteristics of Multi-Source Fatigue Crack in Superalloy Disk

Crack initiation mechanisms and life prediction of GH4169 superalloy in the high cycle and very high cycle fatigue regime

The study of 650 degrees C low cycle fatigue properties on alloy 718 DA turbine disk

Crack propagation life of high-speed aviation gear

Quantitative Analysis on Fatigue Fracture of Spray Formed Gh738 Alloy

Strain Energy Gradient-Based LCF Life Prediction of Turbine Discs Using Critical Distance Concept

Effect of sustained load on fatigue crack growth behavior of FGH96 at elevated temperature