Abstract:Constitutive models play a significant role in understanding the deformation behavior of materials and in optimizing the manufacturing process. In order to improve the reliability of calculation results, the high temperature flow behavior of TA31 titanium alloy obtained from an annealed hot-rolled plate has been investigated by a Gleeble-3500 thermo-mechanical simulator. The isothermal hot compression tests are conducted in the temperature range of 850 to 1050 °C and the strain rate range from 0.001 to 10 s−1 with a height reduction of 60%. The annealed TA31 shows a dynamic recovery characteristic during thermo-mechanical processing. The experimental data have been used to develop an Arrhenius-type constitutive model and a modified Johnson–Cook model under the consideration of coupling effect on strain, temperature, and strain rate, as well as the strain-softening phenomenon. The material parameters are determined by a global optimization method based on the initial values by means of a regression method. A comparation of the predicted results has been performed based on the modified Johnson–Cook model and those acquired from the Arrhenius-type model. The correlation coefficient and average absolute relative error of the modified Johnson–Cook model are 4.57% and 0.9945, respectively. However, when the optimization method has been applied, they are 15.77% and 0.9620 for the Arrhenius-type model, respectively. These results indicate that the modified Johnson–Cook model is more accurate and efficient in predicting the flow stress of annealed TA31 titanium alloy under a set of model material parameters. Furthermore, the simple mathematical expression of this model is helpful to incorporate it into the finite element software to obtain detailed and valuable information during the thermo-mechanical processing simulation for TA31 in further work.

Determination of TA1 Constitutive Relation

Experimental Study on Tensile Properties of CP-Ti Athigh Strain Rate and Different Temperatures

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

The Comparation of Arrhenius-Type and Modified Johnson–Cook Constitutive Models at Elevated Temperature for Annealed TA31 Titanium Alloy

Mechanical Behaviour and Strain Rate Sensitivity Analysis of TA2 by the Small Punch Test

Experimental Study of Tensile Property of Cp-Ti at Intermediate Strain Rates

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

Strain Rate Sensitivity of Tensile Properties in Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy: Experiments and Constitutive Modeling

Identification of Dynamic Constitutive Parameters of a High-Strength Steel and Numerical Simulation

Study on constitutive relationship of 6061 aluminum alloy based on Johnson-Cook model

A Comparative Study on Constitutive Modeling for Flow Behavior of Ultra-Supercritical Steel at High Temperature

Flow Stress Description Characteristics of Some Constitutive Models at Wide Strain Rates and Temperatures

The Constitutive Responses of Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy at High Strain Rates and Elevated Temperatures

Dynamic Mechanical Behavior and Constitutive Model of Stainless Steel

Plastic Deformation Behavior and Constitutive Modeling of Cu-50Ta Alloy During Hot Compression

Determination of Shear Behavior and Constitutive Modeling of the 603 Steel over Wide Temperature and Strain Rate Ranges

A constitutive description of tensile behavior for brass over a wide range of strain rates

Constitutive modelling for strain–hardening alloys during isothermal compression: An efficient semi-empirical method coupling the effects of strain, temperature and strain-rate

Dynamic Mechanical Properties and Modified Material Constitutive Model for Hot Forged Ti2AlNb over Wide Ranges of Temperature and Strain Rate

Constitutive equation and hot processing map of TA15 titanium alloy

Experimental Study on Tension Behavior of Pure Titanium at High Strain Rates