Abstract:Mesoporous TiO2-Al2O3 composites with different Ti/Al molar ratios were successfully synthesized via pre-hydrolysis co-precipitation method and the corresponding NiW supported hydrotreating (HDT) catalysts were prepared via incipient wetness co-impregnation method. The effects of Ti modification on the physicochemical properties of the prepared supports and catalysts were determined by the characterization techniques such as XRD, FTIR, N2 physical adsorption–desorption, SEM-EDS, ICP-OES, NH3-TPD, H2-TPR, HRTEM and XPS. Finally, quinoline, indole and coker gas oil (CGO) were used respectively as probes to investigate the Ti modification on the hydrodenitrogenation (HDN) performances of the corresponding catalysts. The results show that the TiO2-Al2O3 samples synthesized by the pre-hydrolysis co-precipitation method achieved the level of molecular composition, and the crystalline structures, pore properties and acidity properties of the TiO2-Al2O3 supports varied with the Ti/Al molar ratios. Ti modification can modulate the interaction between the active metals and the supports (MSI), and promote the formation of more so-called “type II” NiWS active phases. Furthermore, the existence of Ti3+ species in catalysts NiW/TA1 and NiW/TA2 enhanced the sulfidation degrees of active metals and weakened the bond energy between the active metals and sulfur atoms and further promoted the formation of more coordinatively unsaturated sites (CUS). The catalytic assessment results show that the HDN activities of the catalysts were effectively improved after Ti modification and the improvement was largely due to the promotion of the cleavage of the C(sp3)-N bond of basic nitrides and the C(sp2)-N bond of non-basic nitrides. The NiW/TA1 catalyst exhibited the highest performance in the HDT process of heavy oil, with a 15.8% and 12.4% improvement in HDN rate and hydrodesulfurization (HDS) rate compared with the unmodified catalyst, respectively, which was mainly attributed to its suitable pore properties, moderate MSI, large number of CUS, moderate stacking and highest active metal sulfidation degree of the active phase.

Preparation and characterization of NiW-nHA composite catalyst for hydrocracking.

Hydrocracking of Jatropha oil over Ni-H3PW12O40/nano-hydroxyapatite catalyst

A Clean Hydroprocessing of Jatropha Oil into Biofuels over a High Performance Ni-HPW/CNT Catalyst

Alumina supported H3PW12O40 and Ni catalysts for hydrocracking of n-decane

Supported NiW Catalysts with Tunable Size and Morphology of Active Phases for Highly Selective Hydrodesulfurization of Fluid Catalytic Cracking Naphtha

Hydrocracking of Polyolefin Thermal Cracking Waxes Over Ni-loaded Molecular Sieve Catalysts

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Hydrodeoxygenation of Ni-W bimetallic catalysts for the conversion of jatropha oil into high-quality fuel

Characterization and application of a Pt/ZSM-5/SSMF catalyst for hydrocracking of paraffin wax

A cleaner process for hydrocracking of jatropha oil into green diesel

Hydrocracking of the Crude Oil from Thermal Pyrolysis of Municipal Wastes over Bi-Functional Mo–Ni Catalyst

Synthesis of mesoporous TiO2-Al2O3 composites supported NiW hydrotreating catalysts and their superior catalytic performance for heavy oil hydrodenitrogenation

Hierarchical Porous Honeycomb NiCo/C Catalyst for Decarboxylation of Fatty Acids and Upgrading of Sludge Bio-Crude

Bifunctional catalyst with high efficiency for converting hydrocarbons: The enhanced diffusion between micro and meso-pores

Preparation of Ni-WO3/ZrO2 solid acid catalyst and its catalytic performance for n-heptane hydroisomerization

Transformation of Jatropha Oil into High-Quality Biofuel over Ni-W Bimetallic Catalysts

The Hydrocracking of N-Decane over Bifunctional Ni-H3PW12O40/SiO2 Catalysts

Preparation of nano ZSM-5 with hydrophobic surfaces and application to catalytic cracking of hydrocarbon fuels

Ni/phosphomolybdic Acid Immobilized on Carbon Nanotubes for Catalytic Cracking of Jatropha Oil

Deep Hydroisomerization of n-Hexadecane over NiWS/SAPO-11 Catalyst: Size Effect of the Support and Revelation of the Reaction Network

Direct Synthesis, Characterization and Catalytic Performance of Non-Sulfided Ni–CsxH3−xPW12O40/SiO2 Catalysts for Hydrocracking of N-Decane