Abstract:To investigate the influence of ferroelectric phase LiNbO3 on mechanical properties and structure of Al2O3 ceramic material,in this paper,LiNbO3/ Al2O3 composite materials were prepared using Al2O3,Nb2O5 and LiCO3 as the starting materials through high temperature solid state method and hot pressed sintering method. The phases,mechanical properties and the microstructure of the composites were studied. The results showed that the addition of LiNbO3 was helpful to the sintering of Al2O3 and the sintering temperature of Al2O3 ceramic material was also decreased. When the sintering temperature over 1 200 ℃,the main phases of the composite materials still were LiNbO3 and Al2O3,but a small amount phase of LiNb3O8 existed because some Li elements were volatilized. The bending strength of the 5vol% LiNbO3/95vol% Al2O3 composite materials was the highest( 162. 34MPa) after sintering at 1 200℃ for 3 hours in air. The relative density of 15vol% LiNbO3/85vol% Al2O3 composite hot-pressed at 1300℃ under a pressure of 150 MPa for 1h was 90. 82% and the bending strength and fracture toughness were 393. 94MPa and 2. 38MPam1 /2,respevtively. Non-180° domains formed in LiNbO3 grains in the composite,which contributed to the improving of the mechanical properties of the composite.

Fabrication and Mechanical Property of BaNb2O6/Al2O3 Composite Ceramics

Preparation and Properties of Nano BaNb2O6-Al2O3 Ceramic Composites

Preparation of LiNbO3/Al2O3 Composite Materials and Its Mechanical Properties

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Preparation and Properties of Al_2O_3-modified Ba( Fe_(0.5)Nb_(0.5))O_3 Composite Ceramics

Ferroelastic Structure AlNb1/2Ta1/2O4 Ceramics with Improved Thermophysical and Mechanical Properties

Fabrication and Properties of CaAl12O19-Al2O3 Composite Ceramics

Mechanical Properties and Thermal Shock Resistance of BaAl2Si2O8/BN Ceramic Composites

Effects of AlN Content on Phase Composition, Microstructure and Mechanical Properties of BN-based Composite Ceramics

Effects of Sr2Nb2O7 additive on microstructure and mechanical properties of 3Y–TZP/Al2O3 ceramics

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Effect of BaTiO<sub>3</sub> Addition on Mechanical Properties of BaTiO<sub>3</sub>/Al<sub>2</sub>O<sub>3 </sub>Composite

Enhanced Mechanical Properties, Thermal Shock Resistance and Oxidation Resistance of Si2BC3N Ceramics with Zr-Al Addition

Microstructure and Mechanical Properties of Y-SiAlON/BaSi2Al2O8 Composite Ceramics

Study on the mechanical properties and microstructure of Al2O3/nano-SiC multiphase ceramics

Effect of LaMgAl11O19 Addition and Temperature on the Mechanical Properties of Al2O3-based Ceramics

Effects of AlN content on phase composition, microstructure and mechanical properties of DN-based composite ceramics

Effect of Nb2O5 on the property and microstructure of alumina ceramics

Effect of BaTiO<sub>3</sub> Addition on Mechanical Properties of BaTiO<sub>3</sub>/Al<sub>2</sub>O<sub>3 &Lt;/sub>composite

Microstructures and Mechanical Properties of Pressureless Sintered Ca-3(PO4)(2)/Si3N4 Composite Ceramics

Insights into Intragranular Precipitation and Strengthening Effect in Al2O3/SmAlO3 Ceramic with Eutectic Composition