Abstract:Cu2S, consisting of Earth-abundant and eco-friendly elements, is a promising candidate for thermoelectric energy conversion. The stoichiometric Cu2S has intrinsically low thermal conductivity together with meagre electrical conductivity. Herein, in order to improve the electrical properties, we develop a facile solvothermal method for synthesizing a series of Cu2–xS with tunable phase compositions. With reduction in the CuCl/Na2S molar ratio in the solution precursors from 2:1 to 1.75:1, the solvothermal products transform from single-phase Cu2S into Cu2S–Cu1.96S composites, which are preserved in the hot-pressed pellets. The decreased CuCl/Na2S molar ratio results in increased room-temperature Hall carrier concentration, leading to enhanced electrical conductivity. Specifically, the pellet corresponding to the 1.75:1 CuCl/Na2S precursor ratio obtains a power factor of 8.04 μW cm–1 K–2 at 815 K, which is ∼735% of the value obtained by stoichiometric Cu2S. Along with the moderate thermal conductivity, this sample achieves an enhanced zT value of 0.87 at 815 K, representing a ∼250% increase when compared to stoichiometric Cu2S. This study demonstrates an effective strategy in enhancing the thermoelectric performance of solution-synthesized Cu2S-based materials by phase tuning.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13050.Extra XRD, SEM, TEM, EPMA, EDS, and WDS results on the synthesized samples, calculated weight fraction of Cu1.96S in the samples, Rietveld refinement results, thermoelectric property comparison, and zT values of the Cu2S–Cu1.96S-3 pellets in the first three cycles (PDF)This article has not yet been cited by other publications.

A facile synthetic approach for copper iron sulfide nanocrystals with enhanced thermoelectric performance.

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Colloidal Synthesis of Cu2CdSnSe4 Nanocrystals and Hot-Pressing to Enhance the Thermoelectric Figure-of-merit.

Large‐Scale Colloidal Synthesis of Non‐Stoichiometric Cu2ZnSnSe4 Nanocrystals for Thermoelectric Applications

Room temperature aqueous-based synthesis of copper-doped lead sulfide nanoparticles for thermoelectric application

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

ZnO-Nanoparticle-Dispersed Cu11.5Ni0.5Sb4S13−δ Tetrahedrite Composites with Enhanced Thermoelectric Performance

Realizing Enhanced Thermoelectric Performance and Hardness in Icosahedral Cu 5 FeS 4− x Se x with High‐Density Twin Boundaries

Nanostructure Engineering and Performance Enhancement in Fe2O3-Dispersed Cu12Sb4S13 Thermoelectric Composites with Earth-Abundant Elements.

Enhanced thermoelectric properties of Cu1.8S via the introduction of ZnS nanostructures

Enhanced Thermoelectric Performance of Hydrothermal Synthesized Ag Incorporated Cu &Lt;sub>2-X</sub>s Micro/Nano Composites

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

Ultralow Thermal Conductivity and Extraordinary Thermoelectric Performance Realized in Codoped Cu3SbSe4 by Plasma Spark Sintering

Thermoelectric Performance of Hydrothermally Synthesized Micro/nano Cu2-xS

Highly enhanced thermoelectric performance of copper sulfide by compositing with CNT & CuO

Enhanced thermoelectric performance of chalcopyrite nanocomposite via co-milling of synthetic and natural minerals

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

Design of Chalcopyrite-Type CuFeSe2 Nanocrystals: Microstructure, Magnetism, Photoluminescence and Sensing Performances

Hot-Injection Synthesis Of Cu-Doped Cu2znsnse4 Nanocrystals To Reach Thermoelectric Zt Of 0.70 At 450 Degrees C

Enhancing the Thermoelectric Performance of Cu1.8S by Sb/Sn Co-Doping and Incorporating Multiscale Defects to Scatter Heat-Carrying Phonons