Abstract:Porous zinc oxide (ZnO) nanosheet (NS) arrays constructed by connected nanocrystallites were built on weaved metal wire (WMW) via hydrothermal treatment followed by calcination, and used as photoanodes for flexible dye-sensitized solar cells (DSSCs). An overall light-to-electricity conversion efficiency (h) of 2.70% was achieved for the DSSC under 100 mW cm(-2) illumination, and this h was found to be much higher than that of the DSSC with ZnO nanowire (NW) as the photoanode (0.71%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to: (i) the film consisting of nanosheets with interconnected nanocrystallites can allow relatively direct pathways for the transportation of electrons as the nanosheets have a regular structure with the sheets being oriented to the electrode; (ii) the nanocrystallites assembly and porous character of the nanosheets can provide a large surface area for dye adsorption, which is in favor of enhancing the light absorption and the light propagation; (iii) the nanopores embedded in the nanosheet can act as "branch lines" for more efficient electrolyte diffusion into the interstice of the densely packed nanosheets in the array. A further improvement in the efficiency of the DSSC with ZnO-NS was achieved through the atomic layer deposition (ALD) of an ultrathin titanium oxide (TiO2) layer onto the ZnO-NS layer. The larger charge transfer resistance along with the introduction of a TiO2 shell is thought to reduce the surface recombination and thus contribute to the increase in the open circuit voltage (V-oc) of the DSCs and higher conversion efficiency (3.09%).

Controllable growth of dendritic ZnO nanowire arrays on a stainless steel mesh towards the fabrication of large area, flexible dye-sensitized solar cells.

Vertically Building Zn2SnO4 Nanowire Arrays on Stainless Steel Mesh Toward Fabrication of Large-Area, Flexible Dye-Sensitized Solar Cells.

Porous ZnO Nanosheet Arrays Constructed on Weaved Metal Wire for Flexible Dye-Sensitized Solar Cells.

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

Multilayer Assembly of Nanowire Arrays for Dye-Sensitized Solar Cells.

In Situ Growth of Zinc Oxide Nanoribbons Within the Interstices of a Zinc Stannate Nanoplates Network on Compacted Woven Metal Wires and Their Enhanced Solar Energy Application

Controllable Preparation of 1-D and Dendritic ZnO Nanowires and Their Large Area Field-Emission Properties

Enhancing DSSC Performance through Manipulation of the Size of ZnO Nanorods

Transparent, Double-Sided, Ito-Free, Flexible Dye-Sensitized Solar Cells Based On Metal Wire/Zno Nanowire Arrays

ZnO/TiO 2 Core–shell Nanowire Arrays for Enhanced Dye-Sensitized Solar Cell Efficiency

Nanorod-Nanosheet Hierarchically Structured Zno Crystals on Zinc Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

Controllable Preparation of 2D and 3D ZnO Micro-Nanostructures and Their Photoelectric Conversion Efficiency

A Zno Nanorod/Nanoparticle Hierarchical Structure Synthesized Through A Facile in Situ Method for Dye-Sensitized Solar Cells

Electrodeposition Of Hierarchical Zno Nanorod-Nanosheet Structures And Their Applications In Dye-Sensitized Solar Cells

A Solid-State Dye-Sensitized Solar Cell Based On A Novel Ionic Liquid Gel And Zno Nanoparticles On A Flexible Polymer Substrate

Electrochemical deposition of branched hierarchical ZnO nanowire arrays and its photoelectrochemical properties

Facile in situ synthesis of dendrite-like ZnO/ZnTe core/shell nanorod heterostructures for sensitized solar cells

Tio2 Nanowires/Zno Nanosheets Hierarchically Structure on Ti Foil As Flexible Photoanodes for Dye-Sensitized Solar Cells

Epitaxial Growth of Zno Nanodisks with Large Exposed Polar Facets on Nanowire Arrays for Promoting Photoelectrochemical Water Splitting

Fabrication of dye-sensitized solar cells with ZnO nanorods as photoanode and natural dye extract as sensitizer