Abstract:Zwitterionic polysulfone (PSf) ultrafiltration membranes were fabricated by non-solvent phase separation (NIPS) method. Herein, a casting solution at 45 °C was developed by using chloromethylated polysulfone (CMPSf), N, N-dimethylacetamide (DMAc) as a solvent, 4-amino-benzenesulfonic acid monosodium salt (ABS) as a cross-linking agent, and Na 2 CO 3 as an acid binder. Simultaneously, the occurrence of the electrophilic substitution reaction between ABS and CMPSf caused the formation of ABS grafting CMPSf (CMPSf-g-ABS). After a specific reaction time, the casting solution was applied to cast membranes, which were subsequently submerged in coagulation bath. A zwitterionic ultrafiltration (ZUF) membrane was obtained using NIPS following the treatment of hydrochloric acid (HCl) solution (1 M mol). Because of the formation of cross-linked CMPSf-g-ABS, the results revealed that the casting solution's viscosity increased sharply from 425.4 mPa s at the initial stage (0 h) to 4810.8 mPa s (22 h). Interestingly, the morphology of the membranes with an asymmetric finger-like structure at 0 h gradually transformed to a gradient sponge-like structure after 22 h. Specifically, the ZUF membrane (M22-H) with the gel fraction of 72.1% procured after the reaction of 22 h demonstrated a low water contact angle (40.17°) and a high pure water permeance (420.4 L m −2 h −1 bar −1 ). The M22-H also exhibited a high flux recovery rate (FRR) (90.2%), bovine serum albumin (BSA) rejection (>95%), and Escherichia coli ( E. coli ) antibacterial rate (96.2%). The surface of the ZUF membrane with numerous zwitterionic groups enhances the hydration layer's energy (i region 16 nm), causing a significant improvement in the antifouling performance. This research opens new avenues for preparing zwitterionic functional membranes.

Preparation and Anti-Protein Fouling Property of Δ-Gluconolactone-modified Hydrophilic Polysulfone Membranes

Preparation and Characterization of Sulfated Carboxymethyl Cellulose Nanofiltration Membranes with Improved Water Permeability

Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics

Hydrophilic modification of a PSU membrane with block copolymer of PS-b-SBMA

Fabrication and Study of Dextran/Sulfonated Polysulfone Blend Membranes for Low-Density Lipoprotein Adsorption

Anionic glycosylated polysulfone membranes for the affinity adsorption of low-density lipoprotein via click reactions

Improving the Antifouling Property of Polysulfone Ultrafiltration Membrane by Incorporation of Isocyanate-Treated Graphene Oxide.

Novel antifouling polysulfone matrix membrane modified with zwitterionic polymer

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Immobilization of Sodium Alginate Sulfates on Polysulfone Ultrafiltration Membranes for Selective Adsorption of Low-Density Lipoprotein

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

On the surface hydrophilization of a blended polysulfone membrane: atomic force microscopy measurement and molecular dynamics simulation

Preparation of novel zwitterionic polysulfone ultrafiltration membranes for the dual-enhanced antifouling and antibacterial properties by in-situ one pot crosslinking reaction

Preparation Of Sulfobetaine-Grafted Pvdf Hollow Fiber Membranes With A Stably Anti-Protein-Fouling Performance

Modification of polysulfone ultrafiltration membrane by sequential deposition of cross-linked poly(vinyl alcohol) (PVA) and sodium carboxymethyl cellulose (CMCNa) for nanofiltration

Surface Modification of PVDF Membranes with Sulfobetaine Polymers for a Stably Anti‐protein‐fouling Performance

Surface modification of polysulfone hollow fiber membrane for extracorporeal membrane oxygenator using low-temperature plasma treatment

Improving the hydrophilicity and fouling-resistance of polysulfone ultrafiltration membranes via surface zwitterionicalization mediated by polysulfone-based triblock copolymer additive

Surface modification of a PVDF membrane by co‐grafting hydroxyl and zwitterionic polymers to enhance wettability and antifouling property

Improved Protein-Adsorption Resistance of Polyethersulfone Membranes Via Surface Segregation of Ultrahigh Molecular Weight Poly(styrene-Alt-maleic Anhydride)