Abstract:WC-Co cemented carbides are widely used in the fields of military, aerospace, mining and cutting industry etc. In this paper, a new two-step method for the preparation of WC-Co cemented carbides was proposed. First, the mixture of yellow tungsten trioxide (WO3) and cobaltic oxide (Co2O3) were reduced by carbon black to remove all the oxygen. Then, the carbothermic reduction products were precisely mixed with an appropriate amount of carbon black to directly prepare WC-Co cemented carbides. The effects of C/WO3 ratio on the phase composition, morphological evolution, particle size and mechanical properties of products are investigated. The experimental results revealed that when the C/WO3 molar ratio was above 2.7, all oxygen in the raw material mixture were removed by carbon black and a mixture of W2C and η-phase were obtained after the first step of carbothermic reduction at 1150 °C for 2 h; then, the mixture of carbothermic reduction product and an appropriate content of carbon black was compacted, and the green compact was first carbonized at 1200 °C for 2 h and then sintered at 1450 °C for 4 h to prepare cemented carbides. With the increase of C/WO3 ratio at the first stage, the content of η-phase with a low melting point increased, which resulted in the large grain size of WC in the finally prepared cemented carbide. Compared with the traditional method of preparing cemented carbides, the cemented carbides prepared by the current method showed a higher hardness and toughness. Furthermore, the addition of a proper content of the VC in the second stage can significantly inhibit the grain growth of WC and further increase the hardness of cemented carbides.

Eutectic Solidification Applied to Nanofabrication: A Strategy to Prepare Large-Scale Tungsten Carbide Nanowalls

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

One-dimensional Sub-stoichiometric W3O8Nanowires Filled Carbon Nanotubes

Controllable preparation of tungsten/tungsten carbide nanowires or nanodots in nanostructured carbon with hollow macroporous core/mesoporous shell

Simple Approaches To Quality Large-Scale Tungsten Oxide Nanoneedles

Enhanced Tensile Ductility of Tungsten Microwires Via High-Density Dislocations and Reduced Grain Boundaries

Preparation Technology of Ultra-Fine Tungsten Carbide Powders: an Overview

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Nanostructural Effects Beyond Hall-Petch: Towards Superhard Tungsten Carbide

Large-Size and Ultrahigh Purity Tungsten with Enhanced Physical Properties via Chemical Vapor Deposition

Ultrafine Binderless WC-based Cemented Carbides with Varied Amounts of AlN Nano-Powder Fabricated by Spark Plasma Sintering

High-performance WC-AlCoCrFeNi 2.1 cemented carbides fabricated by resistance seam additive manufacturing

Fabrication of nanocrystalline and ultra-hard tungsten alloy by dual particles dispersion strengthening

A short and facile process to synthesize WC-Co cemented carbides

Filling Double-Walled Carbon Nanotubes with WO3 and W Nanowires Via Confined Chemical Reactions.

Thermal evaporation and solution strategies to novel nanoarchitectures of silicon carbide

Silica-templated Synthesis of Ordered Mesoporous Tungsten Carbide/graphitic Carbon Composites with Nanocrystalline Walls and High Surface Areas Via a Temperature-Programmed Carburization Route.

Synthesis, Crystal Structure, Stability, and Mechanical Properties of the Hexagonal Tungsten Nitride WN1-δ

An approach for synthesizing various types of tungsten oxide nanostructure.

Substrate Engineering toward Selective Growth of Ultrathin WC Crystals and Heterostructures via Liquid Cu‐Zn Catalyst

Fabrication of Bulk Tungsten Microstructure Arrays for Hydrophobic Metallic Surfaces Using Inductively Coupled Plasma Deep Etching