Abstract:Micropumps are one of the most important parts of a microfluidic system. In particular, for biomedical applications such as Lab-on-Chip systems, micropumps are used to transport and manipulate test fluids in a controlled manner. In this work, a low-cost, structurally simple, piezoelectrically actuated micropump was simulated and fabricated using poly-dimethylsiloxane (PDMS). The channels in PDMS were fabricated using patterned SU-8 structures. The pump flow rate was measured to be 9.49 uL/min, 14.06 uL/min, 20.87 uL/min for applied voltages of 12 V, 14 V, 16 V respectively. Further, we report finite element analysis (FEA) simulation to confirm the operation of the micropump and compare favorably the experimentally obtained flowrate with the one predicted by simulation. By taking these flow rates as a reference, the chamber pressure was found to be 1.1 to 1.5 kPa from FEA simulations. Viscosity measurement has wide-ranging applications from the oil industry to the pharmaceutical industry. This work provides an elaborate mathematical model and study of measurement of viscosity in real-time using pressure sensors. For a given flowrate, a change in liquid viscosity gives rise to a change in pressure difference across a particular section of the pipe. Hence, by recording the pressure change, viscosity can be calculated dynamically. Mathematical modeling as well as finite element analysis (FEA) modeling has been presented. A set of pressure sensors were placed at a fixed distance from each other to get the real-time pressure change. Knowing the flow rate in the channel, the viscosity has been calculated from the pressure difference. For the finite element analysis, the pressure sensors were placed 60 mm away from each other. A different ratio of the mixture of water and glycerol was used to provide variable viscosity, which led to the variation in pressure-difference values.

Design, Fabrication and Testing of A Micro-Venturi Tube for Fluid Manipulation in A Microfluidic System

Research and Fabrication of a Low-Cost Valveless Micropump Based on Piezoelectric Actuation

Exploration of micro-miniature venturi pump for continuous glucose monitoring through interstitial fluid (ISF) extraction

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

Design and Fabrication of a Microfluidic System with Nozzle/Diffuser Micropump and Viscosity

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Experimental Characterization of Electrical Current Leakage in Poly(dimethylsiloxane) Microfluidic Devices

Design, fabrication and micro-PIV measurement on no-moving-part micro-pump

Micro-Jet Pump for Micro-Fluidic Systems

Preparation of thermoswitchable micro capillary force valves inside polydimethylsiloxane microfluidic channels

Design and Fabrication of a Microfluidic Viscometer Based on Electrofluidic Circuits

Flow Regulation Performance Analysis of Microfluidic Passive Valve for High Throughput Liquid Delivery

Fabrication and characterization of hydrogel-based microvalves

Design and Fabrication of Valveless Piezoelectric Micropump in Parallel with Double Chambers Based on MEMS Technology

PDMS Microfabrication and Design for Microfluidics and Sustainable Energy Application: Review

Soft tubular microfluidics for 2D and 3D applications

Multi-step PDMS curing and a controlled separation method for mass manufacturing of high-performance and user-friendly micro-devices: valved micropumps

Optimized Design on Micro -Diffuser/nozzle Facing Micro Pump

A Continuous, Low-Flow, and Multiplexing Pumping System for Microfluidics Applications

A Simple And Reliable Configuration With Needle Valve For Manipulating Flow In Microfluidic Chip

Portable Valve-less Peristaltic Micro-pump Design and Fabrication