Abstract:Nanoscale mechanical resonator-based nanoelectromechanical systems have been reported with ultrahigh sensitivity, which are normally acquired from an ultravacuum environment at cryostat temperature. To facilitate their practical applications for gas sensing or bio-detection, it is critical to understand how the fluid (gas or liquid) environment will impact the resonance behaviors of the nanoresonator. This work reports a first-time comprehensive investigation on the influence of the N-2 gaseous environment on the resonance properties of carbon nanotube (CNT)-based mechanical resonator, through a combination of grand canonical Monte Carlo and large-scale molecular dynamics simulations. It is shown that the gaseous environment exerts a significant effect on the resonance properties of the CNT resonator through a dynamic desorption and readsorption process. Under the temperature of 100 K and the pressure of 1 bar, the displacement amplitude of the CNT resonator is found to experience a sharp reduction of about 82% within the first 90 ps vibration in the N-2 gaseous environment. Further, a large initial excitation is found to result in smaller adsorption and a reduced damping effect. For instance, when the excitation velocity amplitude increases from 2 to 8 angstrom/ps, the damping ratio shows more than 40% reduction. It is found that higher pressure leads to a smaller resonance frequency and enhanced damping effect, while higher temperature induces an increase in the resonance frequency but a decrease in the damping ratio. This work shows that the gaseous environment has a marked impact on the vibrational properties of nanoresonators, which should shed light on the application of mechanical nanoresonators in a fluid environment.

Experimental Study on the Speed of Sound Measurement System Using a Cylindrical Resonator

Fundamental Theory and Apparatus for Speed of Sound Measurement System Using Cylindrical Resonator

How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator

Study on measurement technology of dynamics characteristics of typical tubes for pressure measurements

Speed of Sound Measurements Using a Cylindrical Resonator for Gaseous Carbon Dioxide and Propene

Sound speed measurements in gases at low pressures

Viscosity Measurements Using A Cylindrical Resonator

Speed Of Sound Of Gaseous Xenon In The Temperature Range From 308 To 370 K Measured With A Cylindrical Resonator

The influence of boundary layer effect on the measurement of speed of sound using fixed path acoustic resonator

The Influence of Molecular Relaxation on the Gaseous Sound Speed Measurements Using a Fixed Path Acoustic Resonator

Measurement of Speed of Sound with a Spherical Resonator: HCFC-22, HFC-152a, HFC-143a, and Propane

Precision measurement of the speed of sound and thermodynamic properties of gases

Determination of the Second Virial Coefficient for Working Fluid Using a Cylindrical Resonator

Sound speed measurements on gas mixtures of natural gas components using a cylindrical resonator

Progress Toward Redetermining the Boltzmann Constant with a Fixed-Path-Length Cylindrical Resonator

Experimental Speed of Sound for 3,3,3-Trifluoropropene (R-1243zf) in Gaseous Phase Measured with Cylindrical Resonator

Microwave Measurements of the Length and Thermal Expansion of a Cylindrical Resonator for Primary Acoustic Gas Thermometry

The speed of sound in two methane-rich gas mixtures at temperatures between 250 K and 350 K and at pressures up to 20 MPa

DIY small scale resonance tube for measuring the speed of sound in air

Speeds of sound for a biogas mixture $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$ from $p$ = (1-12) MPa at $T$ = (273, 300 and 325) K measured with a spherical resonator

Effect of Transducer Driving Voltages on Speed of Sound Measurement for Primary Acoustic Gas Thermometry