Abstract:Nanoscale mechanical resonator-based nanoelectromechanical systems have been reported with ultrahigh sensitivity, which are normally acquired from an ultravacuum environment at cryostat temperature. To facilitate their practical applications for gas sensing or bio-detection, it is critical to understand how the fluid (gas or liquid) environment will impact the resonance behaviors of the nanoresonator. This work reports a first-time comprehensive investigation on the influence of the N-2 gaseous environment on the resonance properties of carbon nanotube (CNT)-based mechanical resonator, through a combination of grand canonical Monte Carlo and large-scale molecular dynamics simulations. It is shown that the gaseous environment exerts a significant effect on the resonance properties of the CNT resonator through a dynamic desorption and readsorption process. Under the temperature of 100 K and the pressure of 1 bar, the displacement amplitude of the CNT resonator is found to experience a sharp reduction of about 82% within the first 90 ps vibration in the N-2 gaseous environment. Further, a large initial excitation is found to result in smaller adsorption and a reduced damping effect. For instance, when the excitation velocity amplitude increases from 2 to 8 angstrom/ps, the damping ratio shows more than 40% reduction. It is found that higher pressure leads to a smaller resonance frequency and enhanced damping effect, while higher temperature induces an increase in the resonance frequency but a decrease in the damping ratio. This work shows that the gaseous environment has a marked impact on the vibrational properties of nanoresonators, which should shed light on the application of mechanical nanoresonators in a fluid environment.

Sound speed measurements on gas mixtures of natural gas components using a cylindrical resonator

SPEED OF SOUND DATA AND RELATED MODELS FOR MIXTURES OF NATURAL GAS CONSTITUENTS.

How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator

The speed of sound in two methane-rich gas mixtures at temperatures between 250 K and 350 K and at pressures up to 20 MPa

Measurements of Speed of Sound in Lean and Rich Natural Gas Mixtures at Pressures up to 37 MPa Using a Specialized Rupture Tube

Measuring Sound Speed in Gas Mixtures Using a Photoacoustic Generator

Acoustic sensor for determining combustion properties of natural gas

Speed of sound measurements in (carbon monoxide + ethane) and (carbon monoxide + propane) gas mixtures at T = (260 to 350) K and up to 12 MPa

Sound-Speed Sensor for Gas Pipeline Applications

Speeds of sound for a biogas mixture $CH_{4}$ + $N_{2}$ + $CO_{2}$ + $CO$ from $p$ = (1-12) MPa at $T$ = (273, 300 and 325) K measured with a spherical resonator

Determination of Binary Gas Mixtures by Measuring the Resonance Frequency in a Piezoelectric Tube

Speeds of sound in a natural gas of specified composition at the temperature 255 K and pressures in the range 64 kPa to 6.1 MPa

Speed of sound data, derived perfect-gas heat capacities, and acoustic virial coefficients of a calibration standard natural gas mixture and a low-calorific H2-enriched mixture

Theory for a gas composition sensor based on acoustic properties

Speed of sound for three binary ($CH_{4}$ + $H_{2}$) mixtures from $p$ = (0.5 up to 20) MPa at $T$ = (273.16 to 375) K

Speed of Sound Measurements Using a Cylindrical Resonator for Gaseous Carbon Dioxide and Propene

Thermophysical Properties of Natural Gas Components: Apparatus and Speed of Sound in Argon

Speed of sound data, derived perfect-gas heat capacities, and acoustic virial coefficients of a calibration standard natural gas mixture and a low-calorific $H_{2}$-enriched mixture

Experimental Study on the Speed of Sound Measurement System Using a Cylindrical Resonator

Measurement of Speed of Sound with a Spherical Resonator: HCFC-22, HFC-152a, HFC-143a, and Propane

High-frequency measurement of concentration in an isothermal methane-air gas mixture using spontaneous Raman spectroscopy