Abstract:Numerical analyses are performed to investigate ultrasonic wave propagation in fluid-solid half-spaces subject to a directional source. This research is particularly concerned with the behavior of refracted waves within fluid mediums and their utility in determining the acoustic velocities of solid materials. The simulations encompass solids with various mechanical parameters and highlight the influence of incident angles on wave propagation. The analysis reveals that as the disparity between incident and critical angles increases, both the dominant frequencies and amplitudes of the corresponding refracted waves decrease substantially, which is detrimental to the accurate extraction of solid velocities. For the low-velocity solid characterized by its shear wave velocity being less than the fluid's acoustic velocity, refracted longitudinal waves are susceptible to interference from direct and reflected waves. This interference often results in underestimated velocity measurements. The challenge can be addressed by either extending the source-receiver offset or by adjusting the incident angle closer to the critical angle. Regarding solids with shear wave velocities exceeding the fluid's acoustic velocity, although the velocity-time correlation (VTC) method can accurately determine longitudinal wave velocities, shear wave velocity extraction may be compromised by the presence of the leaky Rayleigh wave. We further compare velocities calculated by dividing the spacing distance of two receivers by the time difference of their respective wave packet arrivals. Results indicate that the initial trough and peak of the S wave packet are predominantly influenced by refracted shear waves and the leaky Rayleigh wave, respectively. This occurs because refracted shear waves propagate slightly faster than the leaky Rayleigh wave. Consequently, using the first trough of the shear wave packet as the wave onset can mitigate the impact of the leaky Rayleigh wave, yielding precise shear wave velocity measurements. These studies are of considerable importance for applications in geophysical downhole measurements and nondestructive testing.

Fundamental Theory and Apparatus for Speed of Sound Measurement System Using Cylindrical Resonator

Study on measurement technology of dynamics characteristics of typical tubes for pressure measurements

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

A Study on Finite Amplitude Standing Waves in Stepped Acoustic Resonator

Design of Piezoelectric Resonant Sound Emission Receiver Sensor

Viscosity Measurements Using A Cylindrical Resonator

Discussion on resonant frequency in thermoacoustic systems

The influence of boundary layer effect on the measurement of speed of sound using fixed path acoustic resonator

Development for the High-temperature and High-pressure Brillouin Scattering

Photoacoustic Measurement of Sound Speed in Solid Medium

Microwave Measurements of the Length and Thermal Expansion of a Cylindrical Resonator for Primary Acoustic Gas Thermometry

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Simultaneously Measuring Thickness, Density, Velocity and Attenuation of Thin Layers Using V(z,t) Data from Time-Resolved Acoustic Microscopy.

Ultrasonic Pressure Measurement in Pressure Vessels

Measuring sound velocity based on acoustic resonance using multiple narrow band transducers

Research on Portable Resonant Density Meter

Measuring the speed of sound with a pan flute and a smartphone: a half-melodic and totally-didactic experiment

DIY small scale resonance tube for measuring the speed of sound in air

Obliquely incident ultrasonic wave propagation in a fluid-solid configuration and solid velocity measurements

Numerical Study of Sound Pressure Distribution in Volume Determination with Acoustic Method

Sound Speed Measurement Using Phase Estimation Method of Pulse Signal in Water