Abstract:A gathering pipeline in a gas field in Northeast China transporting mainly natural gas and also some water and sands was welded using two 20G pipes with different wall thicknesses. The internal corrosion of this pipeline was inhomogeneous. The unequal wall thickness welded joint suffered more serious corrosion damage than did other parts of the pipe and was found to fail during routine maintenance. In this paper, the corrosion damage at this joint was studied based on inhomogeneity. Internal and external factors affecting corrosion, such as the mechanical and electrochemical properties of materials, stress distribution at the joint, and the flow condition in the pipe, and their combined action were investigated. Failure attribution was performed on this basis. Specifically, a hardness test was conducted on different zones of the joint, including the base metal (BM), heat-affected zone (HAZ) and weld metal (WM), to investigate the abrasive wear resistance at the joint. Microstructures of the three zones were characterized by optical microscopy. The morphology and composition of the corrosion film covering the inner surface of the welded joint were characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS) and X-ray powder diffraction (XRD). Potentiodynamic polarization experiments and electrochemical impedance spectroscopy (EIS) were conducted on samples from the three zones to investigate their electrochemical performances. Moreover, a computational fluid dynamics (CFD) analysis was performed to obtain the flow condition near the joint, and a finite element method (FEM) was used to calculate the stress distribution at the joint. The results showed that the internal corrosion mechanism of the pipeline was CO2 corrosion accelerated by detrimental Cl−. The geometric discontinuity of the welded joint was the main cause of the accelerated corrosion damage at the joint. The change in wall thickness of the welded pipe not only produced gas vortices but also led to stress concentration. Both of these conditions can further accelerate corrosion by destroying the protectiveness of the corrosion film. It is suggested that the corrosion can be prevented by eliminating the inhomogeneities of fluid flow and stress distribution.

Grooving Corrosion of Oil Coiled Tubes Manufactured by Electrical Resistance Welding

Grooving Corrosion of Electric-Resistance-Welded Oil Well Casing of J55 Steel

The Corrosion Resistance of 0cr19ni9 Stainless Steel Arc Welding Joints with and Without Arc Surface Melting

GROOVING CORROSION PROPERTIES OF ELECTRIC RESISTANCE WELDED OIL WELL CASING OF J55 STEEL

Weldability and Damage Evaluations of Fresh-to-Aged Reformer Furnace Tubes

Effect of Welding on Corrosion Behavior of 304SS Steel

Electrochemical Investigation of the Corrosion of Different Microstructural Phases of X65 Pipeline Steel under Saturated Carbon Dioxide Conditions

Study on Gradual Change of Corrosion Behaviors in 13mnnimor Steel Weld Joint Serviced in Eo Reactor

Electrochemical Corrosion of the Pipe Body of a J55 Steel by the Electric Resistance Welding

Corrosion Behavior of Oil Tube Steels under Conditions of Multiphase Flow Saturated with Super-Critical Carbon Dioxide

Corrosion Behavior of J55 Steel in Oilfield Water

Flow-Accelerated Corrosion Damage in a Steam Pipe Girth Weld

Failure analysis of corrosion at an inhomogeneous welded joint in a natural gas gathering pipeline considering the combined action of multiple factors

Pitting Behavior of Welded Joint and the Role of Carbon Ring in Improving Corrosion Resistance

Corrosion resistance of underwater wet welds produced with a new oxyrutile electrode: influence of polarity, welding current, and depth

Understanding the Effect of Corrosion Resistance in Welded AA2198‐T8 Alloy: Microstructural‐Electrochemical Insights

Effect of Surface Morphology on Galvanic Corrosion Resistance at Welds after De-rusting

Corrosion resistance of stainless steel layer prepared by twin-wire indirect arc surfacing welding

Corrosion failure analysis of high strength grade super 13Cr-110 tubing string

Effect of Microstructure Evolution on Corrosion Behavior of Friction Stir Welded Joint for 2195-T8 Alloy

Pitting Corrosion and Stress Corrosion Cracking Around Heat Affected Zone in Welded Joint of CrNiMoV Rotor Steel in Chloridized High Temperature Water