Abstract:To achieve the high dispersion of SiO2 nanoparticles in polyurethane acrylate resin, the titanate coupling agent, PN-102, was used as the surface modifier to prepare the modified SiO2 nanoparticles (Si-PN102-5) with small particle size and good dispersion ability in PUA-6 resin. Accordingly, hydrophilic SiO2 (Si-380) and hydrophobic SiO2 (Si-115) were introduced into PUA-6 resin to prepare the corresponding composite coatings, so as to investigate the effects of SiO2 nanoparticles modified with different surface modifiers on the properties of PUA / SiO2 composite coatings. The properties of PUA / SiO2 composite coatings were characterized by the tests of FTIR, AFM, SEM, DMA, TG and so on. The FT-IR and XPS results show that PN-102 had functionalized the SiPN102-5 particle surface successfully. The TEM test displays that the particle size of SiO2 was almost unchanged before and after modification, maintaining at about 20-30 nm. The SEM, DMA and tensile test reveal that Si-PN102-5 not only blocks the interaction and accumulation of nanoparticles, but also enhances the interface interaction with polymer chains through chain entanglement, which endows Si-PN102-5-5% composite coatings with highest mechanical strength among the other prepared coatings, reaching to 11.0 +/- 0.1 MPa in tensile strength and 9.4 +/- 3.0% in elongation at break. The pencil hardness of the prepared Si-PN102-5-5% composite coating could reach to 5H which is higher than the commercial PUA-6 based coating, and it also displayed good adhesion (4B) and flexibility (3 mm). The TG results show that all of prepared composite coatings display good thermal stability with a decomposition temperature of higher than 250 degrees C.

Characterization of the Waterborne Polyurethane/Nanosilica Composite Synthesized by Dispersing Nanosilica in Polytetrahydrofuran Glycol

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Preparation and characterization of nanocomposite polyurethane.

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Synthesis and characterization of polyurethane/SiO2 nanocomposites

Structure and Properties of Polyurethane/nanosilica Composites

Properties of in-situ polymerized casting polyurethane/nano-silica composites

In Situ Polymerization and Characterization of Polyester‐based Polyurethane/nano‐silica Composites

The Preparation and Characterization of Aqueous Nanosilica/Polyester Composite Resin and Coatings

Effect of Nanosilica on the Properties of Polyester‐based Polyurethane

The synthesis and properties of siloxane-urethane copolymers aqueous nanodispersion using hydroxyalkyl and hydrohxypolyester terminated polydimethylsiloxane

Preparation and Characterization of Silicone Oil Modified Polyurethane Damping Materials

Polyurethane/polyphenylsilsequiloxane nanocomposite: From waterborne dispersions to coating films

Preparation and Properties of UV-curable Polyurethane Acrylate/sio2 Composite Hard Coatings

Thermoplastic polyurethane/silica nanocomposite fibers by electrospinning

Performance of polyurethane and polyurethane nanocomposites modified by graphene, carbon nanotubes, and fumed silica in dry and wet environments

Preparation and Properties of Waterborne Polysiloxaneurethane/Clay Nanocomposite

Synthesis and Characterization of Nanocomposites of Silicon Dioxide and Polyurethane and Epoxy Resin Interpenetrating Network

Surface and Interface Characterization of Polyester‐based Polyurethane/nano‐silica Composites

Preparation, mechanical properties of waterborne polyurethane and crosslinked polyurethane‐acrylate composite