Abstract:This study was designed to develop and characterize a silica-coating method for crystalline nonsilicate ceramic nanoparticles (Al2O3, TiO2, and ZrO2). The hypothesis was that the coated nonsilicate nanoparticles would stably reinforce a polymeric matrix due to effective silanation. Silica coating was applied via a sol-gel method, with tetraethyl orthosilicate as a silica precursor, followed by heat treatment. The chemical and microstructural characteristics of the nanopowders were evaluated before and after silica coating through x-ray diffraction, BET (Brunauer-Emmett-Teller), energy-dispersive x-ray spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy analyses. Coated and noncoated nanoparticles were silanated before preparation of hybrid composites, which contained glass microparticles in addition to the nanoparticles. The composites were mechanically tested in 4-point bending mode after aging (10,000 thermal cycles). Results of all chemical and microstructural analyses confirmed the successful obtaining of silica-coated nanoparticles. Two distinct aspects were observed depending on the type of nanoparticle tested: 1) formation of a silica shell on the surface of the particles and 2) nanoparticle clusters embedded into a silica matrix. The aged hybrid composites formulated with the coated nanoparticles showed improved flexural strength (10% to 30% higher) and work of fracture (35% to 40% higher) as compared with composites formulated with noncoated nanoparticles. The tested hypothesis was confirmed: silanated silica-coated nonsilicate nanoparticles yielded stable reinforcement of dimethacrylate polymeric matrix due to effective silanation. The silica-coating method presented here is a versatile and promising novel strategy for the use of crystalline nonsilicate ceramics as a reinforcing phase of polymeric composite biomaterials.

The Preparation and Characterization of Aqueous Nanosilica/Polyester Composite Resin and Coatings

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Preparation of Magnesium Hydroxide Sulfate Whisker-Phenolic Resin Composite by In-Situ Polymerization Technique and Its Properties

Preparation and characterization of nanocomposite polyurethane.

Preparation and Characterization of Polyester/Silica Nanocomposite Resins

Polyolefin nanometer compound material and its preparation technology

In Situ Polymerization and Characterization of Polyester‐based Polyurethane/nano‐silica Composites

Preparation and characterization of acrylic latex/nano-SiO2 composites

Progress on Synthesizing SiO_2/Polymer Nanocomposite Emulsion

Structure and Properties of Polyurethane/nanosilica Composites

Preparation of Polystyrene/Sio2 Composite Nanoparticles Bearing Sulfonic Groups on the Surface Via Emulsion Copolymerization Using A Polymerizable Emulsifier

Effects of preparation method on microstructure and properties of UV-curable nanocomposite coatings containing silica

Preparation And Characterization Of Uv-Curable Mps-Modified Silica Nanocomposite Coats

Surface and Interface Characterization of Polyester‐based Polyurethane/nano‐silica Composites

Modification of colloidal silica on the mechanical properties of acrylic based polyurethane/silica composites

Preparation of Solvent-borne Acrylic-based Polyurethane-Modified Silica Nanocomposites

Preparation and Characterization of Acrylate/Nano-SiO2 Compound Emulsion

Properties of in-situ polymerized casting polyurethane/nano-silica composites

Silica Coating of Nonsilicate Nanoparticles for Resin-Based Composite Materials

Preparation and characterization of polyacrylate composite and its application in superhydrophobic coating based on silicone-modified ZnO

Preparation and Characterization of Scratch and Mar Resistant Waterborne Epoxy/Silica Nanocomposite Clearcoat