Abstract:Nanocomposites of poly(epsilon -caprolactone) (PCL) castable polyurethane elastomer (CPUE) with nano-SiO2 particles of different surface properties were prepared via in-situ polymerization. An electronmechanical universal testing machine, a durometer, a rubber resilience experimental machine, a dynamic-mechanical analyzer, a thermogravimetric analysis and a scanning electron microscope were used to investigate the macro -static/dynamic mechanical properties, micro-dispersed state and thermostability. The results showed that the modulus at 100% and 300%, elongation at break, tensile strength and tear strength of poly(epsilon -caprolactone) urethane nanocomposites were increased by introducing a certain amount of nano-SiO2. Especially the tensile strength and tear strength at 100 degrees C of the PCL CPUE with 5% nano-SiO2 pretreated by gamma-glycidochloropropyl methyl trimethoxy silane (trade name A-187) were 1.50 and 1.94 times than those of the pure PCL CPUE, respectively. The addition of the nano-SiO2 had little effect on the hardness, but the impact resilience decreased slightly. The loss factor peaks of two nano-SiO2 polyurethane composites were higher obviously than the pure PCL CPUE and the glass transition temperature (T-g) of the two nano-SiO2 polyurethane composites increased to higher temperature region. The surface treatment by the optimum silane coupling agent influenced the dispersibility of nano-SiO2 in the PCL CPUE distinctly. The agglomerating phenomenon, and even some nano-agglomerates with more than 1 mu m diameter can be observed in the PCL CPUE with 5% untreated nano-SiO2, but the nano-SiO2 pretreated by A-187 was dispersed in the PCL CPUE at nano-scale.

Properties of in-situ polymerized casting polyurethane/nano-silica composites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

In Situ Polymerization and Characterization of Polyester‐based Polyurethane/nano‐silica Composites

Structure and Properties of Polyurethane/nanosilica Composites

Synthesis and characterization of polyurethane/SiO2 nanocomposites

Characterization of the Waterborne Polyurethane/Nanosilica Composite Synthesized by Dispersing Nanosilica in Polytetrahydrofuran Glycol

Synthesis and characterization of well-dispersed polyurethane/CaCO3 nanocomposites

In-Situ Polymerization And Characterization Of Poly (Epsilon -Caprolactone) Urethane/Sio2 Nanocomposites

Preparation and characterization of nanocomposite polyurethane.

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Preparation, Structure and Properties of Nano-Silica/poly(glycerol-sebacate-citrate)bioelastomer Composites by Solvent Assistant In-Situ Dispersion Technique

Synthesis of a Coupling Agent Containing Polyurethane Chain and Its Influence on Improving the Dispersion of SiO2 Nanoparticles in Epoxy/amine Thermoset

Synthesis and Characterization of Silica Nanocomposite in Situ Photopolymerization

Preparation and Properties of Carbon Fiber/polyether Polyurethane Composites

The Properties of High Solid Acrylic Based Polyurethane and Acrylic Latex Embedded with Nano-Silica

Properties of Casted Polyurethane Reinforced by Nano-sized SiO_2

Synthesis of UV-Cured Silicone Resin/Silica Nanocomposites from UV-Curable Polysilisiquioxane and Methacrylate-Functionalized Silica

Synthesis and Characterization of Nanocomposites of Silicon Dioxide and Polyurethane and Epoxy Resin Interpenetrating Network

PREPARATION OF POLYURETHANE/CARBON NANOTUBES COMPOSITES FOAM THROUGH in Situ POLYCONDENSATION

Silica Nanoparticles Filled Polypropylene: Effects of Particle Surface Treatment, Matrix Ductility and Particle Species on Mechanical Performance of the Composites

Effect of Nanosilica on the Properties of Polyester‐based Polyurethane