Abstract:Physically based constitutive equations incorporating the key microstructural mechanisms e.g. dislocations, grain size, etc, have been used widely to predict the stress-strain behaviour of alloys at plastic and viscoplastic conditions. This enables an accurate prediction of the formed geometry as well as the final underlying microstructures. However, these physically based constitutive equations have not been practically validated due to the lack of systematic experimental data at microscopic scale. This leads to a large number of unknown constants required to be determined through various optimization algorithms. The aim of this paper is to provide direct and systematic experimental data by revealing the dislocation (geometrically necessary one) density and grain size evolution of AA6082, which is a widely used high-strength aluminium alloy for automobile structural panels, as functions of strain, strain rate and temperature, and is the first-time using Electron Back Scattering Diffraction (EBSD) technique to visualize the microstructures during the hot deformation. The evolution of the dislocation accumulation during the hot tensile deformation at 300, 450, 530 degrees C using various strain rates (i.e. 1/s, 0.1/s, 0.01/s) was achieved. EBSD maps were analysed on samples submitted to a true strain level of similar to 0.1 and similar to 0.3 under each condition. These maps cover >3000 grains and enable to capture the statistical nature of the geometrically necessary dislocation densities during hot deformation. Despite the rapidly plateaued flow stress curves at high temperatures, a continuously increased average GND density was observed in AA6082 with the imposed true strain levels under all conditions. Dislocation channel structures were observed in the hot deformed samples. Dynamic recrystallization was also observed, which coupled with the GNDs and affected the hardening behaviour of the flow stress-strain curves. This work is the first study, using EBSD, to visualize the high temperature and high strain rate induced dislocation distributions over a relatively large area, providing valuable data that may be used for subsequently improving and calibrating the physically based material models.

Study of Vacancy-Type Defects by Positron Annihilation in Ultrafine-Grained Aluminum Severely Deformed at Room and Cryogenic Temperatures

Vacancy-Type Defects Study on Ultra-Fine Grained Aluminium Processed by Severe Plastic Deformation

Vacancy-Assisted Hardening in Nanostructured Metals

Experimental and Numerical Investigation on Pure Aluminum by ECAP

Effect of Cryogenic Temperature Equal Channel Angular Pressing on Microstructure, Bulk Texture and Tensile Properties of AA1050

Micro-deformation Behavior in Micro-Compression with High-Purity Aluminum Processed by ECAP

Mechanical responses, texture and microstructural evolution of high purity aluminum deformed by equal channel angular pressing

An Insight into the Deformation and Orientation Development of Severely Plastic Deformed Aluminum

Microstructure Evolution in High Purity Aluminum Single Crystal Processed by Equal Channel Angular Pressing (ECAP)

EBSP Study of the Annealing Behavior of Aluminum Deformed by Equal Channel Angular Processing

Microstructural Evolution at Micro/Meso-Scale in an Ultrafine-Grained Pure Aluminum Processed by Equal-Channel Angular Pressing with Subsequent Annealing Treatment

Microstructure and Properties of Ultrafine-Grained Aluminum-Based Alloy Processed by Equal Channel Angular Pressing

Direct Observation of Shear Deformation During Equal Channel Angular Pressing of Pure Aluminum

Deformation Behavior of Pure Aluminum at Room and Cryogenic Temperatures

Grain Refinement and Strengthening of an Aluminum Alloy Subjected to Severe Plastic Deformation through Equal-Channel Angular Pressing

Mechanical behavior of ultra-fine grained aluminum at different temperatures and strain rates

Effect of Grain Size and Specimen Dimensions on Micro-Forming of High Purity Aluminum

Effect of ECAP on microstructure uniformity and mechanical properties of high purity aluminum

In-situ EBSD study on the microstructure evolution of an Al-Mg-Si-Fe alloy with different precipitation free zones during tension at cryogenic and ambient temperatures

Effects of cryogenic deformation on the microstructure and mechanical properties of high-strength aluminum alloys

Quantifying Geometrically Necessary Dislocation Density During Hot Deformation in AA6082 Al Alloy