Abstract:The chemical foaming technique is possibly the most common method of producing porous geopolymers. Despite this, to date, the role of the content and type of surfactant on the pore size distribution of porous geopolymers is not fully perceived, as constant surfactant dosages are usually employed. In addition, the comparison of literature studies is challenging since a distinct mixture of designs is employed. This investigation intends to provide additional insights on the topic, focusing on synthesizing red mud/metakaolin geopolymer foams and envisioning their use in thermal insulating applications. Various mixtures were prepared using three commercially available surfactants, namely Hostapur OSB, sodium dodecyl sulfate (SDS), and Triton X114. The content of the surfactant (0.025, 0.05, and 0.075 wt.%) and the amount of the foaming agent (aluminum powder, Al; 0.05, 0.075, and 0.10 wt.%) was modified, keeping the binder composition constant and the physical properties of the produced geopolymers were characterized. Results show that the combination between sodium dodecyl sulfate (0.025 wt.%) and aluminum (0.10 wt.%) leads to the strongest reduction in the foam density, the lowest value here reported being -400 kg/m3. On the other hand, samples produced with Hostapur OSB have much higher open porosity (up to 47.7%) and water absorption (up to 80.4%) values, showing that this surfactant leads to a pore network with higher connectivity. In addition, the microstructure of the foams, particularly pore morphology (size and shape) and connectivity between the produced pores are highly dependent on the type of surfactant, sodium dodecyl sulfate generating coarser pore size distribution with round, but mostly closed pores, while a narrower pore size distribution coupled with smaller size pores is seen with the Hostapur. These results suggest the feasibility of tuning the foams' properties (porosity and mechanical performance) according to the application by the proper combination of the type of surfactant and their concentration, enabling their use as thermal and acoustic insulators or as filters/membranes in wastewater treatment systems.

Characterization of Stone Powder Sludge Foams and Their Application to Wastewater Treatment: Role of Pore Connectivity

Role of Adding Dried Sludge Micropowder in Aerobic Granular Sludge Reactor with Extended Filamentous Bacteria

Study of Affecting Factors on Porosity in Gel-Casting Foam

Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent

Evaluation of the Nature and Concentration of the Surfactant on the Properties of Red Mud/Metakaolin Porous Geopolymers Foamed with Aluminium

Effects of Ammonium Molybdate Additive and Sintering Temperature on the Properties of Foam Ceramics Based on Ceramic Tile Polishing Waste

Quantitative characterization and control mechanism of pore structure in geopolymer foams with addition of various surfactants

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

Effects of Foaming Agent on Microstructure and Properties of Porous Mullite Ceramics

Effect of porcelain polishing waste additive on properties and corrosion resistance of ceramic foams produced from zeolite

Study on the Effect of Foam Stability on the Properties of Foamed Lightweight Soils

Biofilm Development Dynamics and Pollutant Removal Performance of Ceramsite Made from Drinking‐water Treatment Sludge

Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study

Effects of carrier surface hydrophilic modification on sludge granulation: From sludge characteristics, extracellular polymeric substances, and microbial community

Preparation of foam concrete from solid wastes: Physical properties and foam stability

Effect of different foam stabilizers on the setting behavior and pore characteristics of CAC-bonded Al2O3 foamed ceramics

A New Polystyrene-Latex-based and EPS-containing Synthetic Sludge

Surfactant-mediated settleability and dewaterability of activated sludge

A novel approach for preparing glass ceramic foams from MSWI fly ash: foaming characteristics and hierarchical pore formation mechanism

Ultralight Alumina Ceramic Foams with Single-Grain Wall Using Sodium Dodecyl Sulfate As Long-Chain Surfactant

Understanding the role of polyurethane sponges on rapid formation of aerobic granular sludge and enhanced nitrogen removal