Abstract:The utilization of solid waste building materials is conducive to the green and low-carbon development of the construction industry. In this study, fly ash, red mud and other solid waste were used to prepare high-performance solid waste unburned ceramsite, and the mix ratio design of lightweight high-strength concrete was carried out. The main conclusions are as follows: The prepared solid waste unburned ceramsite has a compressive strength of 8.9 MPa, a bulk density of 556 kg/m 3 , and a 1 h water absorption of 5.9%, which meets the relevant requirements of "Lightweight aggregates and its test methods-Part 1: Lightweight aggregates" (GB/T 17431.1–2010). Microstructure analysis demonstrated that the internal hydration products of unburned ceramsite were mainly hydrated calcium silicate and ettringite. On the basis of the detection and analysis of the content of six heavy metals in unburned ceramsite, the pollution assessment results of unburned ceramsite were consistent by means of the environmental assessment. That is, there is no environmental risk for the six heavy metals. At the same time, the Cr, As and Cd in unburned ceramsite need to be controlled, as they pose a carcinogenic risk to the human body. Therefore, the risk control of heavy metals Cr, As and Cd in unburned ceramsite was carried out. The 28 d compressive strength of lightweight high-strength concrete (cement 756 kg, silica fume 42 kg, slag powder 42 kg, floating beads 210 kg, ceramsite 165 kg, water reducer 16.8 kg, defoamer 2 kg, thickener 5 kg, water 218.4 kg) prepared by unburned ceramsite can reach 45.2 MPa, the dry apparent density is 1435 kg/m 3 , and the slump and expansion are 240 mm and 635 mm respectively, which meet the relevant requirements in the "Technical standard for application of lightweight aggregate concrete" (JGJ/T 12–2019). By calculating the carbon emission reduction of unburned ceramsite lightweight high-strength concrete, it is found that the carbon emission generated during the production and transportation of unburned ceramsite lightweight high-strength concrete is much smaller than that of ordinary lightweight high-strength concrete. The above results can provide basic theoretical support for the utilization of solid waste resources for lightweight high-strength concrete.

Optimization of coal-based solid waste ceramsite foam concrete mix proportions and performance study

Sustainable Use of Coal Gangue and Other Wastes in Lightweight Material: Physical-mechanical, Environmental Security and Synergistic Mechanisms

Performance Study of Foam Concrete Prepared by the Synergistic Utilization of Agricultural Waste and Coal Gangue Based on Double Orthogonal Experiments

Thermal and mechanical properties of coal gasification slag based foam concrete

Improving the Compressive Performance of Foam Concrete with Ceramsite: Experimental and Meso-Scale Numerical Investigation

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

Study on the Performance of Foam Concrete Prepared from Decarburized Fly Ash

Recycling of Silicomanganese Slag and Fly Ash for Preparation of Environment-Friendly Foamed Ceramics

Study on the preparation and performances analysis of lightweight high strength ceramsite aerated concrete

Preparation and Properties of Foam Concrete Incorporating Fly Ash

Preparation of foam concrete from solid wastes: Physical properties and foam stability

Collaborative Disposal of Multisource Solid Waste: Influence of an Admixture on the Properties, Pore Structure and Durability of Foam Concrete

A non-fired ceramsite construction material with enhanced lightweight high strength properties

Experimental study on the physico-mechanical properties and microstructure of foam concrete mixed with coal gangue

Preparation of Lightweight Ceramsite from Solid Waste Using SiC as a Foaming Agent

Preparation of Glass Ceramic Foams for Thermal Insulation Applications from Coal Fly Ash and Waste Glass

Study on the Recycling of Ceramic Polishing Slag in Autoclaved Aerated Foam Concrete by Response Surface Methodology

Experimental study on properties of ceramsite foam concrete produced by grouting method

Preparation and Modeling of Energy-Saving Building Materials by Using Industrial Solid Waste

Safety and environmental protection application of high performance solid waste unburned ceramsite and its lightweight high strength concrete

Improving Thermal Conductivity and Drying Shrinkage of Foamed Concrete with Artificial Ceramsite from Excavation Soil and Sewage Sludge