Abstract:To avoid introduction of milling media during ball‐milling process and ensure uniform distribution of SiC and graphite in ZrB2 matrix, ultrafine ZrB2–SiC–C composite powders were in‐situ synthesized using inorganic–organic hybrid precursors of Zr(OPr)4, Si(OC2H5)4, H3BO3, and excessive C6H14O6 as source of zirconium, silicon, boron, and carbon, respectively. To inhabit grain growth, the ZrB2–SiC–C composite powders were densified by spark plasma sintering (SPS) at 1950°C for 10 min with the heating rate of 100°C/min. The precursor powders were investigated by thermogravimetric analysis–differential scanning calorimetry and Fourier transform infrared spectroscopy. The ceramic powders were analyzed by X‐ray diffraction, X‐ray photoelectron spectroscopy, and scanning electron microscopy. The lamellar substance was found and determined as graphite nanosheet by scanning electron microscopy, Raman spectrum, and X‐ray diffraction. The SiC grains and graphite nanosheets distributed in ZrB2 matrix uniformly and the grain sizes of ZrB2 and SiC were about 5 μm and 2 μm, respectively. The carbon converted into graphite nanosheets under high temperature during the process of SPS. The presence of graphite nanosheets alters the load‐displacement curves in the fracture process of ZrB2–SiC–G composite. A novel way was explored to prepare ZrB2–SiC–G composite by SPS of in‐situ synthesized ZrB2–SiC–C composite powders.

In Situ Preparation of Sic/Si3n4-Nw Composite Powders by Combustion Synthesis

In Situ Combustion Synthesis of Composite Ceramics

Combustion Synthesis of Nanosized Β-Sic Powder on a Large Scale

Synthesis of Ceramic Nanocomposite Powders with in Situ Formation of Nanowires/Nanobelts

Preparation of SiC/Si3N4 composites with rod-like microstructure by combustion synthesis

Preparation of SiC Coated Graphite Composite Powders by Nitriding Combustion Synthesis

Combustion synthesis of SiC/Al2O3 composite powders with SiC nanowires and their growth mechanism

Combustion synthesis of α-Si3N4 powders using in-situ nano-SiO2 coated Si and Si3N4 reactants

Controlled growth of SiC crystals in combustion synthesis

In situ synthesis of homogeneously dispersed SiC nanowires in reaction sintered silicon-based ceramic powders

Synthesis of Silicon Nitride/Silicon Carbide Nanocomposite Powders through Partial Reduction of Silicon Nitride by Pyrolyzed Carbon

On the Progress of Combustion Synthesis of Si<sub>3</sub>N<sub>4</sub> Ceramic: From Laboratory Research to Industrial Production

Carbothermally prepared nanophase SiC/ Si3N4 composite powders and densified parts

In‐situ combustion synthesis of spherical Si@Si3N4 granules

ZrB2–SiC–G Composite Prepared by Spark Plasma Sintering of In‐Situ Synthesized ZrB2–SiC–C Composite Powders

On the Progress of Combustion Synthesis of Si3n4 Ceramic: from Laboratory Research to Industrial Production

Preparation of ZrB<sub>2</sub>-ZrC-SiC-ZrO<sub>2</sub> nanopowders with in-situ grown homogeneously dispersed SiC nanowires

Preparation of ZrB2-ZrC-SiC-ZrO2 nanopowders with in-situ grown homogeneously dispersed SiC nanowires

In situ combustion synthesis of spherical Si@Si<sub>3</sub>N<sub>4</sub> granules

Silicon Oxycarbide Powders Doped with in Situ Grown SiC Nanowires: Synthesis and Dielectric Properties

In‐situ combustion synthesis of spherical Si@Si <sub>3</sub> N <sub>4</sub> granules