Abstract:The response to refining of wheat straw and eucalyptus pulps as well as the relationships between refining, fiber properties, and paper properties are described in this paper. Pulps were bleached applying different bleaching sequences and thereafter refined to varying degrees. Pulp and fiber properties were investigated and set into relation to the final sheet properties. The results show that wheat straw pulps respond to refining more easily than eucalyptus pulps and that the differences are due mainly to morphological and ultrastructural differences as well as fines content and xylan content. The development of strength properties of the different pulps was found to be strongly correlated to the number of dislocations, i.e. weak points in the fiber wall, as well as to the morphological appearance of the pulp fibers after refining. A higher initial number and a faster development of dislocations together with the creation of large amounts of fines explain the slower and lower development of strength properties of wheat straw pulps than of eucalyptus pulps. Removal of fines from wheat straw pulps improved not only the drainability of the pulp suspension but also the mechanical and optical sheet properties. This indicates that the fines in the wheat straw pulps act mainly as filler with low bonding properties. The fact that fractionated D(EOP)D wheat straw pulps can deliver good mechanical sheet properties at very good drainability with no or only minor refining is very interesting when evaluating the potential of replacing or partially replacing eucalyptus with domestic Chinese raw materials in furnishes for production of different paper products.

Improvement of bleached wheat straw pulp properties by using aspen high-yield pulp.

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Effect of Hemicellulose Pre-Extraction on the Properties and Bleachability of Aspen (populus Tremuloides) Chemithermomechanical Pulp

Co-Refining of Wheat Straw Pulp and Hardwood Kraft Pulp

Using Cationic Polyvinyl Alcohol (C-Pva) to Improve the Strength of Wood-Free Papers Containing High-Yield Pulp (Hyp)

Pulp Properties And Fiber Characteristics Of Aspen Ctmp Modified By Xylanase

Extracting Hemicelluloses Prior to Aspen Chemi-Thermomechanical Pulping: Effects of Pre-Extraction on Pulp Properties.

Biomechanical Pulping of Corn Stalk Rind with a White Rot Fungus – Trametes Hirsuta – and the Use of Delignified Corn Stalk Pith As a Pulp Additive

Applications Of Ecf-Bleached Wheat Straw Kraft Pulp In Fine Paper

H2O2 Bleaching of Brown Pulp with Adsorbed Xylan and Its Modifying Effects on the Mechanical Properties of Paper

Studies on pulping and bleaching of aspen and Eucalyptus

Acid Pre-Extraction Of Hemicelluloses Prior To Aspen Ctmp Process

Tcf Bleaching Of Triploid Of Chinese Aspen Pulp

On the Study of Enzymatic Chemical Pulping of Wheat Straw and Bleaching of Pulps

REPLACEMENT OF SOFTWOOD KRAFT PULP WITH ECF-BLEACHED BAMBOO KRAFT PULP IN FINE PAPER

Bio-mechanical pulping of aspen coacting with alkline hydrogen peroxide

Improved Bleached Chemical Reed Pulp Properties Using Atmospheric High Consistency Refining

Pulp and Fiber Characterization of Wheat Straw and Eucaluptus Pulps - A Comparison

Progress in the Research of Fiber Honification of Chemical Pulp

Surface Chemical and Morphological Properties of DQP Bleached Wheat-Straw Pulp

Valorisation of wheat straw into paper with improved quality characteristics using ultrafiltered xylano-pectinolytic pulping approach