Abstract:BACKGROUND:There is considerable interest in the conversion of lignocellulosic biomass to liquid fuels to provide substitutes for fossil fuels. Pretreatments, conducted to reduce biomass recalcitrance, usually remove at least some of the hemicellulose and/or lignin in cell walls. The hypothesis that led to this research was that reactor type could have a profound effect on the properties of pretreated materials and impact subsequent cellulose hydrolysis.RESULTS:Corn stover was dilute-acid pretreated using commercially relevant reactor types (ZipperClave(®) (ZC), Steam Gun (SG) and Horizontal Screw (HS)) under the same nominal conditions. Samples produced in the SG and HS achieved much higher cellulose digestibilities (88% and 95%, respectively), compared to the ZC sample (68%). Characterization, by chemical, physical, spectroscopic and electron microscopy methods, was used to gain an understanding of the effects causing the digestibility differences. Chemical differences were small; however, particle size differences appeared significant. Sum-frequency generation vibrational spectra indicated larger inter-fibrillar spacing or randomization of cellulose microfibrils in the HS sample. Simons' staining indicated increased cellulose accessibility for the SG and HS samples. Electron microscopy showed that the SG and HS samples were more porous and fibrillated because of mechanical grinding and explosive depressurization occurring with these two reactors. These structural changes most likely permitted increased cellulose accessibility to enzymes, enhancing saccharification.CONCLUSIONS:Dilute-acid pretreatment of corn stover using three different reactors under the same nominal conditions gave samples with very different digestibilities, although chemical differences in the pretreated substrates were small. The results of the physical and chemical analyses of the samples indicate that the explosive depressurization and mechanical grinding with these reactors increased enzyme accessibility. Pretreatment reactors using physical force to disrupt cell walls increase the effectiveness of the pretreatment process.

Biomechanical Pulping of Corn Stalk Rind with a White Rot Fungus – Trametes Hirsuta – and the Use of Delignified Corn Stalk Pith As a Pulp Additive

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Alkaline Peroxide Extrusion Pulping of Cotton Bast and Cotton Stalk

Extracting Hemicelluloses Prior to Aspen Chemi-Thermomechanical Pulping: Effects of Pre-Extraction on Pulp Properties.

Effects of Biomass Pretreatment on the Extraction of Hemicelluloses and the Pulp Quality of the Subsequent CTMP

The Potential Valorization of Corn Stalks by Alkaline Sequential Fractionation to Obtain Papermaking Fibers, Hemicelluloses, and Lignin—A Comprehensive Mass Balance Approach

Pulp Properties And Fiber Characteristics Of Aspen Ctmp Modified By Xylanase

Effect of Hemicellulose Pre-Extraction on the Properties and Bleachability of Aspen (populus Tremuloides) Chemithermomechanical Pulp

Synergistic utilization of cold caustic extraction and deep eutectic solvent for the production of dissolving pulp from corn stalks

Achieving Refining Energy Savings and Pulp Properties for Poplar Chemithermomechanical Pulp Improvement Through Optimized Autohydrolysis Pretreatment

A Single Step Fractionation of Lignocellulose in Aqueous Solutions of a Carboxylic Acid-Functionalized Ionic Liquid

Acid Pre-Extraction Of Hemicelluloses Prior To Aspen Ctmp Process

Characterization of natural cellulose fiber from corn stalk waste subjected to different surface treatments

New Strength Agent: Corn Stalk Pulp Applied on Package Board

Effect of Mechanical Disruption on the Effectiveness of Three Reactors Used for Dilute Acid Pretreatment of Corn Stover Part 1: Chemical and Physical Substrate Analysis

Improving Pulping Performance as Well as Reducing Consumption and Increasing Efficiency via Microbial Consortium Pretreating Bamboo

Comparative Evaluation of the Efficient Conversion of Corn Husk Filament and Corn Husk Powder to Valuable Materials Via a Sustainable and Clean Biorefinery Process

Potential To Produce Sugars and Lignin-Containing Cellulose Nanofibrils from Enzymatically Hydrolyzed Chemi-Thermomechanical Pulps

Sustainable valorization of paper mill sludge into cellulose nanofibrils and cellulose nanopaper

Co-production of high-concentration fermentable sugar and lignin-based bio-adhesive from corncob residue via an enhanced enzymatic hydrolysis