Abstract:Cellulosic paper products based on sustainable resources are of interest as a replacement for petroleum-based plastics, for example, in packaging applications. Improvements are desired for mechanical performance, recyclability, and possibilities to shape fiber networks into complex geometries. Commercial bleached wood fibers from the kraft process have insufficient mechanical properties for many applications, even with beating and additives. In addition, mechanical properties of paper structures are significantly reduced after recycling. Here, recycling and 3D shaping performance of holocellulose fibers are compared with kraft fibers and investigated in the context of wood fiber tailoring for eco-friendly materials. Holocellulose fibers from wood are prepared by mild peracetic acid delignification for well-preserved nanostructures and hemicellulose content (28 wt %). Paper structures of about 50% porosity are prepared from both types of fibers by vacuum filtration and drying. Mechanical tensile tests are performed, and fracture surfaces are investigated. The effects of recycling on the fiber structure (chemical composition, morphology, and crystallite size in fibers) and mechanical paper properties are reported. 3D-shaping performance is studied using compression molding with a double-curved mold. Holocellulose paper structures showed much better mechanical properties than kraft fiber paper (Young's modulus 10 GPa, ultimate tensile strength 100 MPa), as well as better recycling performance (only 26% decrease in strength after 5 cycles) and 3D formability. The well-preserved cellulose and hemicellulose components are important, as well as the homogeneity of the fiber cell wall nanostructure. This preserves the intrinsic mechanical properties of fibers, reduces hornification effects, and provides strong interfiber adhesion. Furthermore, the water-soluble hemicelluloses present at the cellulose-cellulose interface are able to facilitate recycling and 3D forming.

Progress in the Research of Fiber Honification of Chemical Pulp

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Effect of Different Chemical Treatments on the Dispersion Properties of Carbon Fiber and Paper Properties

Interfacial Modiﬁcation and Dispersion of Short Carbon Fiber and the Properties of Composite Papers As Gas Diffusion Layer for Proton Exchange Membrane Fuel Cell (PEMFC)

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

The Effects of NaOH-Urea Aqueous Solution on the Strength and Softness Properties of Bamboo Ligno-cellulosic Fibers

Research On Cotton Stalk Pulping With Alkaline Peroxide Extruding Pulp

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Effects of pretreatment on the recycling properties of birch holocellulose paper

In-situ Preparation of Nano-calcium Carbonate/Cellulose Fiber Composite and Its Application in Fluff Pulp

Application of fiber modification enzymes in the refining of fine papers

Research on Milox Pulping of Non-Wood Raw Material

Preparation of Pulp Refining Additive from Paper Sludge Through Organic Modification

Upgrading waste paper by in-situ calcium carbonate formation

Elucidating the hornification mechanism of cellulosic fibers during the process of thermal drying

Holocellulose fibers and paper from birch based on peracetic acid treatment

Effects of Deinking Mode on Pore Structure and Crystallization Property of Recycled Fiber

Producing Cellulose Microfibrils at a High Solid Content with and without Mechanical or Enzymatic Pretreatment

Recycling Without Fiber Degradation—Strong Paper Structures for 3D Forming Based on Nanostructurally Tailored Wood Holocellulose Fibers

Interfacial control and dispersion characteristics of polylactic acid fiber/pulp fiber composites

High-Consistency Mechano-Enzymatic Fibrillation of Bamboo Pulp Fibers to Produce Precursors for Highly Fibrillated Cellulose and Dense Films with Multifunctionalities