Abstract:This study examines the fibre properties induced by cooking to different kappa numbers (similar to 10, 20 and 26), cooking procedures, ECF bleaching and refining of bamboo pulps in relation to the properties of the resulting paper sheet. Two different cooking methods were applied: a high temperature with a short cooking time and a low temperature with a prolonged cooking time. The unbleached pulps, with kappa numbers 20 and 26, required less energy to reach a certain Schopper Riegler value, and exhibited much higher strength properties (tensile index, burst and tear at a given SR value), than the low kappa number pulp (similar to 10). Cooking to a high kappa number also gave paper sheets with a density that was between 10 and 15% lower at a given tensile index. No major differences in the final properties of the paper could be ascertained between the two cooking procedures. The response of the bleached pulps to refining was similar to that of the unbleached pulps. Although the high kappa number pulps had been subjected to more extensive bleaching to reach the same brightness as the pulps with low kappa number, they still required less energy to reach a certain SR value and had greater strength properties. A main conclusion reached was that the properties of the bleached pulps were dependent on the initial fibre properties of the unbleached fibres. Thus, the cooking conditions, washing and handling of the pulp is of the utmost importance for producing pulps of high quality. This investigation may help mills to find the optimum link between cooking and bleaching when bamboo is used as the raw material.

Studies on pulping and bleaching of aspen and Eucalyptus

Effect of Hemicellulose Pre-Extraction on the Properties and Bleachability of Aspen (populus Tremuloides) Chemithermomechanical Pulp

Study on the LMS Biobleaching of Eucalyptus Kraft Pulps

Effect of chemical composition and wood property on kraft pulping of eucalyptus

Electrochemically Mediated Bleaching of Aspen Kraft Pulp with Violuric Acid as Mediator

Improvement of bleached wheat straw pulp properties by using aspen high-yield pulp.

Study on the modification of bleached eucalyptus kraft pulp using birch xylan

Relationship between the Change in E/T Ratio and the Cooking Performance of Eucalyptus and Acacia Woods during Kraft Pulping Process

Alkali Sulfite Pulping and Papermaking Performances of Oil Palm Fiber

Extended modified continuous cooking of softwoods followed by ECF and TCF bleaching

Tcf Bleaching Of Triploid Of Chinese Aspen Pulp

Pulp Properties And Fiber Characteristics Of Aspen Ctmp Modified By Xylanase

STUDY ON THE ODQP AND DQP BLEACHING OF FAST-GROWING EUCALYPTUS KRAFT PULP

A comparative study of the cell wall level delignification behaviour of four Nordic hardwoods during kraft pulping

Acid Pre-Extraction Of Hemicelluloses Prior To Aspen Ctmp Process

Biobleaching of eucalyptus kraft pulp and its mechanism

Comparison on Wood Properties and Pulping Performance Between Bamboo-Willow and Two Fast-Growing Hardwoods

A Preliminary Investigation into the Pulping Performance of One-Year-old Eucommia Ulmoides Olir.

Extracting Hemicelluloses Prior to Aspen Chemi-Thermomechanical Pulping: Effects of Pre-Extraction on Pulp Properties.

Study on ECF Bleaching of Eucalyptus Slab Edging Kraft Pulp

The Effect Of Cooking To Different Kappa Numbers On Refining And Paper Sheet Properties