Abstract:The reliability and stability of bearing operation are crucial factors limiting the performance of high-speed rotating machinery. In this study, an ultra-high-speed hybrid ceramic rolling element triboelectric bearing (US-HCTEB) was developed to provide real-time dynamic behavior and stability monitoring. Herein, we adopted a floating rolling-sliding combination freestanding mode that ensures bearing structural integrity. Furthermore, a crown-shaped cage was employed with an opening, allowing the ceramic rolling element to be used as a dielectric material that was coupled with a sector-shaped interdigital electrode set on the bearing end cover to form a floating freestanding triboelectric nanogenerator (TENG). The rolling element self-rotated and revolved owing to the traction of the raceways, sweeping the electrodes to generate an alternating current. Additionally, the superiority and reliability of the US-HCTEB were demonstrated using a 30 million cycle durability test and an ultra-high rotating speed test at 16000 rpm, which far exceeds the capabilities of previously reported triboelectric bearings. The US-HCTEB output was then evaluated considering variable working conditions, structural optimization, and the surrounding environment. Dry contact lubrication and low humidity were found to be beneficial for the output performance. The spectra of the output current and the statistics describing the rolling element instantaneous speed suggest that the high-speed heavy radial load of the US-HCTEB could reduce overall skidding at the cost of increased instability. Subsequently, an extremely fast acceleration and deceleration test program was conducted on the US-HCTEB to evaluate its performance under the complex and nonstationary conditions in which high-speed bearings operate. The results revealed that the US-HCTEB not only achieved realtime and high-resolution dynamic behavior identification but also exhibited high reliability as it functioned appropriately until bearing failure. Thus, the proposed high-precision US-HCTEB can serve as an essential basis for the development of smart rolling bearings.

Performance of High-Speed Grease Lubricated Hybrid Ceramic Ball Bearing

Design on Hybrid Ceramic Bearing Based on Water Based Fluid with Controllable Viscosity

Research and Experiment on the Thermal Characteristics of Hybrid Ceramic Bearings

Friction and Wear Properties of Si3N4 and SiC Used for Water-Lubricated Sliding Bearings

Effect of the grease thickener on tribological properties of Si3N4/GCr15 contact interface and the performance in hybrid ceramic ball bearing

Design and application on experimental platform for high-speed bearing with grease lubrication

Friction and Wear of Self-Mated SiC and Si 3 N 4 in Green Water-Based Lubricant

Experimental Study on Adaptability of Full Ceramic Ball Bearings under Extreme Conditions of Cryogenics and Heavy Loads

Fabrication and service of all-ceramic ball bearings for extreme conditions applications

Study and Performance Test of Full Complement Cycloidal Ball Reducer with Ceramic Balls as its Gear Teeth

Study on Distribution of Lubricating Oil Film in Contact Micro-Zone of Full Ceramic Ball Bearings and the Influence Mechanism on Service Performance

Effect of raceway surface topography based on solid lubrication on temperature rise characteristics of HIPSN full ceramic ball bearings

The performance evaluation of hybrid roller bearings under lubricant contamination conditions

Analysis of cage dynamic characteristics for high-speed full ceramic ball bearing under non-lubrication condition

Research on the influencing factors of thermal characteristics of high-speed grease lubricated angular contact ball bearing

Research on vibration characteristics of silicon nitride 6206 full-ceramic bearing with different pre-tightening force and oil supply rate

Ultra-high-speed Hybrid Ceramic Triboelectric Bearing with Real-Time Dynamic Instability Monitoring

Analysis and Evaluation of the Synergistic Effect of Ceramic Materials and Surface Texture on Anti-Abrasive Particle Wear under Rolling Conditions

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

The Tribological and Adsorption Performance of Chlorophenyl Silicone Oil Using Different Ceramic Materials under High Temperature

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps