Abstract:This paper presents a WR-2.2 band (330-500 GHz) waveguide with E-plane bends and a waveguide bandpass filter. A micro-metal additive manufacturing technology employs copper to process these devices. This technology includes several micromachining processes, which can produce integrated, miniaturized, and complex three-dimensional metal microstructures when meeting the process constraints. To successfully apply this technology to the fabrication of terahertz waveguide devices, many design details are considered. First, the E-plane bent transition structures in the waveguide overcome size limitations imposed by the manufacturing process, allowing for accurate measurement using standard waveguide interfaces. Second, the rectangular resonators compose the fifth-order waveguide bandpass filter spanning 20 GHz with a center frequency of 380 GHz. Given that the excess photoresist needs to be removed, some release holes are designed in the proper positions of the filter. Third, to increase the uniformity of the device layout and improve the machining quality in the electroforming process, a lot of rectangular holes are arranged around the device. By adopting a meticulous and novel design method in accordance with the process advantages and limitations, the fabrication accuracy of the device size is greatly increased. The integrated filter with exceptional performance is obtained. The measured average insertion loss within the passband is better than 1.2 dB, and the return loss exceeds 15 dB. Additionally, the filter demonstrates a center frequency offset of approximately 0.5%. Good consistency between simulation and measurement shows the validity of design and fabrication.

G-band rectangular waveguide filter fabricated using deep reactive ion etching and bonding processes

MEMS Rectangular Waveguide Filter at 140 GHz

D-Band Micromachined Silicon Rectangular Waveguide Filter

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

Miniaturized W-Band Gap Waveguide Bandpass Filter Using the MEMS Technique for Both Waveguide and Surface Mounted Packaging.

Microfabrication of a Dual-Mode Rectangular Waveguide Filter

A 0.9-THz Integrally Manufactured High-Precision Waveguide Cavity Filter Using Electrochemical Micromachining Technology

Copper Micromachined WR‐2.2 Band Waveguide and Bandpass Filter

A 340ghz Cross-coupled Waveguide Filter Based on MEMS Process

A Novel Terahertz Waveguide Filter Based on MEMS Technology

1 THz Micromachined Waveguide Band-Pass Filter

A novel microstrip MEMS bandpass filter on silicon substrate

A Silicon-Based Self-Shielded MEMS Bandpass Filter

Design and Fabrication of a MEMS Bandpass Filter with Different Center Frequency of 8.5-12 GHz.

Microfabrication of Air-Filled Rectangular Waveguide Using Dry Film As Sacrificial Layer

Rf-Mems Baw Filter Using Surface Micromachining

Design of Dual-mode Rectangular Waveguide Filter Based on MEMS Processing

WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing

WR‐1.5 (500–750 GHz) Waveguide Bandpass Filter Fabricated Using High Precision Computer Numerically Controlled Machining

Micromachined W-Band Waveguide Duplexer Design Based on MEMS Technology