Abstract:In this contribution, the design and manufacturing of an all-metal coaxial-line X-band bandpass filter is discussed. The device is 3D-printed as a self-supported structure without any dielectric inside the coaxial. The mechanical support between the inner and outer coaxial-line conductors is provided by means of short-circuited stubs, which are also used in the bandpass filter design. The real transmission zeros (TZs) produced by the short-circuited stubs are responsible for a high filter selectivity. In order to enhance the filter performance, a second stage consisting in a coaxial-line stepped-impedance low-pass filter is integrated in the design to provide the rejection level required for the out-of-band behaviour. Following our design method, the bandpass and low-pass filters are designed separately, and a final matching step is performed to connect both and to achieve the aimed frequency specifications. In this way, a monoblock coaxial filter with very good in-band and out-of-band performance can by obtained by using an additive manufacturing (AM) procedure. Only the input/output (I/O) coaxial connectors will need to be assembled to the filter to perform the frequency measurements. The filters in this work can be seen as a first proposal towards more complex multi-functional monoblock structures using additively-manufactured coaxial technology, for highly-integrated RF chains. Other expected benefits beyond the compactness or lightweight are an increased RF shielding, electrostatic discharge risk reduction, and Passive Intermodulation (PIM) protection. In the paper, a prototype with a passband between 8 and 12 GHz is designed and manufactured, using a bandpass filter with three stubs and an integrated 15th-order low-pass filter, providing rejection for spurious frequencies up to 30 GHz. The filter is manufactured using Selective Laser Melting (SLM) and measurements show an excellent agreement with the simulations.

WR-3.4 Band Waveguide and Bandpass Filters Using Copper Additive Manufacturing

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

Miniaturized Dual-Band Substrate Integrated Waveguide Filter with Controllable Bandwidths

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A 3D Printed 300 GHz Waveguide Cavity Filter by Micro Laser Sintering

W-Band Waveguide Filters and Diplexer Using Metal Stripline Resonators

Design and implementation of evanescent mode waveguide filters using dielectrics and additive manufacturing techniques

A 0.9-THz Integrally Manufactured High-Precision Waveguide Cavity Filter Using Electrochemical Micromachining Technology

Planar Insert Loaded Triple Band Waveguide Bandpass Filter for X-Band Applications

3D Printed Waveguide Step-Twist with Bandpass Filtering Functionality

Design of an Additively-Manufactured Self-Supported All-Metal Coaxial-Line X-Band Bandpass Filter

Micro Metal Additive Manufactured Low-Loss Slotted Rectangular Waveguides Operating at 220-500 GHz

A Design Method to Realize Manufacture-Friendly Millimeter-Wave Folded Substrate Integrated Waveguide Bandpass Filters

Additively Manufactured Metal-Only Waveguide-Based Millimeter-Wave Broadband Achromatic Reflectarrays

Compact Wideband Groove Gap Waveguide Bandpass Filters Manufactured with 3D Printing and CNC Milling Techniques

Design of Dual-band Filtering Antenna Based on 3-D Printed Half-mode Gap Waveguide Quadruple-mode Resonator

Wideband High‐gain Millimetre/submillimetre Wave Antenna Using Additive Manufacturing

SLM Printed Waveguide Dual-Mode Filters With Reduced Sensitivity to Fabrication Imperfections

Compact Multilayer Bandpass Filter Using Low-Temperature Additively Manufacturing Solution