Abstract:Shield-gate trench MOSFET in a low-to-medium voltage range (12－250 V) plays a key role in the power conversion market due to its low power loss caused by the sheild-gate structure. In order to eliminate the faults resulting from the parasitic effects of the device and improve the conversion efficiency, the device model is indispensable in designing a circuit system. In this paper, a compact model of shield-gate trench MOSFET based on BSIM4 is proposed, including the DC model and the capacitance model. In the DC model, the basic MOSFET structure uses BSIM4, and the equivalent resistances of the basic MOSFET in series are divided into three parts. The equivalent resistance model of JFET region is established by using the electric potential difference between both ends for the first time, and the equivalent resistance model of electron diffusion region is also introduced, in order to solve the problem of current error caused by neglecting the source potential of JFET region. The equivalent resistance between drain and JFET region and the equivalent resistance of electron diffusion region both prove to be constant. In the capacitance model based on BSIM4, the model of shield-gate to drain capacitance is added to the model of drain to source capacitance, and the voltage bias between drain and gate in the model of gate to drain capacitance is modified into the potential difference between the node at the end of the gate-drift overlap region and the gate. Poisson equations are used to solve the electric potential of this node. Furthermore, the gate oxide thickness factor k1, the shield-gate oxide thickness factor k2, the equivalent length of gate-drift overlap Lovequ and the equivalent length of shield-gate LSHequ are introduced to redefine the position of gate and shield-gate, thereby simplifying the Poisson equations and ensuring the smoothness of the potential curve of the node. Comparison of the data from the simulation by using Verilog-A program with the test results from the experimental platform shows that the model simulation results fit well with the test data, Therefore, the proposed model is verified.

Research on power model of multi-mode FinFET standard cell

Key Characterization Factors of Accurate Power Modeling for FinFET Circuits

Design of Low-Power High-Performance FinFET Standard Cells

Low Power High Performance FinFET Standard Cells Based on Mixed Back Biasing Technology.

Simulation Study of Device Physics Issues in III&#x2013;V MOSFETs at 10 Nm Node

A novel experimental investigation on scalable model for on-chip GaAs MESFETs

Reliability Evaluation of High-Performance, Low-Power FinFET Standard Cells Based on Mixed RBB/FBB Technique

A Fully Analytical Current Model for Gate–Source Overlap Tunneling FETs as the Ternary Devices

Analytical Models for Threshold Voltage, Drain Induced Barrier Lowering Effect of Junctionless Triple-Gate Finfets

Leakage Power Reduction Of Adiabatic Circuits Based On Finfet Devices

Analytical Model of Channel Electric Field Profile in Finfet

Multi-bias Small Signal Circuit Model for FinFET Transistors

A Compact Model of Shield-Gate Trench MOSFET Based on BSIM4

Device Design for Low Power Electronics with Accurate Deep Submicrometer LDD-MOSFET Models

Analytical Models for Channel Potential, Threshold Voltage, and Subthreshold Swing of Junctionless Triple-Gate FinFETs

A Leakage Power Estimation Method for Standard Cell Based Design

Investigation of Source/Drain Recess Engineering and Its Impacts on FinFET and GAA Nanosheet FET at 5 Nm Node

Nanoscale Triple-Gate FinFET Design Considerations Based on an Analytical Model of Short-Channel Effects

Study on the Regulation Factors and Mechanism of Self-Heating Effects in non-rectangular 14 nm Bulk FinFET

Power modeling and characteristics of field programmable gate arrays

A physical based model to predict performance degradation of FinFET accounting for interface state distribution effect due to hot carrier injection