Abstract:The foam-cored sandwich structure is used widely in the fields of aeronautics and aerospace for having the advantages of higher stiffness ratio and strength ratio. The main propose of this paper is to explore the stability problem of sandwich structure used in the UAV (Unmanned Aerial Vehicle), in which the thick or soft core usually leads to the short-wave buckling mode, namely wrinkling. Sections 1 and 2 of the full paper explain and evaluate our study mentioned in the title, which we believe gives some in-depth results. The core of sections 1 and 2 consists of; (1) in order to simulate the overall buckling and wrinkling of the sandwich beam subjected to uniaxial compression load, a two-dimensional finite element model of foam-cored sandwich beam with aluminum face-sheets was developed in Ansys software; (2) the critical instability load, the buckling/wrinkling control mode, and the inherent relation between them were calculated and analyzed based on the model; (3) the simulation studies were carried out to investigate the influences of the main structural parameters on the stability of the sandwich beam, such as the core thickness, the core elastic modulus and the thickness ratio of core-to-sheet. The research results, given in Figs. 4 though 7 and Tables 2 and 4, and their analysis show preliminarily that: (1) the critical instability load of foam-cored sandwich beam increases with increasing core thickness and elastic modulus; (2) the thickness ratio and elastic modulus ratio of core-to-sheet are key parameters to determine which kind of three instability modes finally occurs, e. g. overall buckling, symmetrical wrinkling and antisymmetrical wrinkling. Section 3 gives our preliminary conclusions in more detail with some suggestions for optimization design and engineering application of the foam-cored sandwich structure.

In-Depth Study on Buckling and Wrinkling of Foam-Cored Sandwich Beam under Uniaxial Compression Load

Experiments and Analysis on Stability of the Sandwich Structures with Soft Core

Experimental and Numerical Evaluation of the Flexural Properties of Stitched Foam Core Sandwich Structure

Experimental and Numerical Evaluation of Fatigue Behavior of Foam Core Sandwich Structure

Experimental and Analytical Study on the Mechanical Behavior of Stitched Sandwich Composite Panel with a Foam Core

Design and Analysis of a Light Composite Wing with Foam Core Sandwich Structure

An Experimental Investigation on Energy Absorption of Multi-layer Sandwich Structures with Metallic Corrugated Cores under Out-of-plane Compressive Load

Finite Element Analysis of Sandwich Overall Buckling and Wrinkling

Design optimization of foam-reinforced corrugated sandwich beams

FEM Modelling of Single-Core Sandwich and 2-Core Multilayer Beams Containing Foam Aluminum Core and Metallic Face Sheets under Monolithic Bending

Compressive Local Buckling of Integrated Fluted-Core Sandwich Composite Panels

Effect of core thickness and cell structure on flexural behaviour of closed-cell aluminum foam sandwich beams

Analytical Modeling and Finite Element Simulation of the Plastic Collapse of Sandwich Beams with Pin-Reinforced Foam Cores

Analysis of Buckling Failure Modes of Composite Sandwich Panels Filled with Aluminum Foam

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Indentation of Rigidly Supported Sandwich Beams with Core Gradation

A Couple-Stress Model to Predict the Wrinkling Stress of Sandwich Panels with Foam Cores

Experiment and numerical analysis on the stability of metal corrugated sandwich beams under compression loads

Quasi-static Bending Response and Energy Absorption of a Novel Sandwich Beam with a Reinforced Auxetic Core under the Fixed Boundary at Both Ends

Failure Mechanisms of Fluted-Core Sandwich Composite Panels under Uniaxial Compression

Failure and Deformation Modes of Sandwich Beams under Quasi-Static Loading