Abstract:The transverse bending and axial compressing mechanical properties of carbon fiber reinforced plastic (CFRP) sandwich laminated square tubes with two kinds of cores, aluminum honeycomb and aluminum foam, respectively, were studied. The failure mechanism and damage processes of the two different CFRP sandwich laminated square tubes were studied by three-point bending and axial compressing experiments, comparing to CFRP hollow laminated square tube. The three-point bending process of CFRP sandwich laminated square tubes were also simulated in ABAQUS/Explicit and the failure mechanism and modes were deeply analyzed. The analytical model of composite laminated box beam using shear-deformable beam theory was extended to calculate the stiffness characteristics of CFRP sandwich laminated square tubes. The variation of bending, axial and shear stiffness in the linear elastic range were predicted. The results show that, after reaching the peak of three-point bending load, the bearing capacity of CFRP hollow laminated square tube reduced greatly due to the buckling instability of the two vertical sides, while that of the CFRP sandwich laminated square tubes were still considerable. A sudden strength damage occurred in the CFRP sandwich laminated tubes under the axial load, and the sandwich panels could slow down the drop of bearing capacity and increase the energy absorption. The load–displacement histories of numerical simulation and experimental result were in good agreement. The differences between analytically calculated and experimental measured stiffness characteristics were within 6.5%. The bending stiffness and axial stiffness of CFRP sandwich laminated tubes are large when the ply angle in the range from 0 to 45 degrees. Compared with the CFRP aluminum foam sandwich square tube, the specific stiffness and specific energy absorption of CFRP aluminum honeycomb sandwich square tube were higher but the energy absorbed was inferior.

Failure and Deformation Modes of Sandwich Beams under Quasi-Static Loading

Analysis of deformation and failure mechanism of sandwich beams with lattice core under three-point bending load

Failure Behavior of a Sandwich Beam with GLARE Face-Sheets and Aluminum Foam Core under Three-Point Bending

Three-point bending of sandwich beams with aluminum foam-filled corrugated cores

Three-point bending performances of integral-forming aluminum foam sandwich

Quasi-static Indentation Responses of FMLs/2.5D Woven Carbon-Fiber Honeycomb Sandwich Structures under Different Structural Parameters

The Load-Carrying Capacity of Sandwich Beams in Different Collapse Mechanisms

The influence of asymmetric faces on low-velocity impact failure of CFRP/aluminum foam composite sandwich beams

The Impulsive Response of Aluminium Foam Core Sandwich Structures

In-plane compressive responses and failure behaviors of composite sandwich plates with resin reinforced foam core

Design optimization of foam-reinforced corrugated sandwich beams

An Experiment Study on the Failure Mechanisms of Woven Textile Sandwich Panels under Quasi-Static Loading

Experimental study on flexural performance of tooth-plate-glass-fiber hybrid sandwich beams

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

Dynamic response of multilayer sandwich beams with foam-filled trapezoidal corrugated and foam cores under low-velocity impact

Dynamic response of clamped sandwich beams with foam-filled sinusoidal corrugated core subjected to low-velocity impact

The Plastic Collapse of Sandwich Beams with a Metallic Foam Core

Large deflection behavior of circular sandwich plates with metal foam-core

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Experimental and theoretical study on the response of the X-frame CFRP sandwich beam under the local impulsive loading

Study on damage failure for a new double-triangular truss core sandwich structure