Abstract:The foam-cored sandwich structure is used widely in the fields of aeronautics and aerospace for having the advantages of higher stiffness ratio and strength ratio. The main propose of this paper is to explore the stability problem of sandwich structure used in the UAV (Unmanned Aerial Vehicle), in which the thick or soft core usually leads to the short-wave buckling mode, namely wrinkling. Sections 1 and 2 of the full paper explain and evaluate our study mentioned in the title, which we believe gives some in-depth results. The core of sections 1 and 2 consists of; (1) in order to simulate the overall buckling and wrinkling of the sandwich beam subjected to uniaxial compression load, a two-dimensional finite element model of foam-cored sandwich beam with aluminum face-sheets was developed in Ansys software; (2) the critical instability load, the buckling/wrinkling control mode, and the inherent relation between them were calculated and analyzed based on the model; (3) the simulation studies were carried out to investigate the influences of the main structural parameters on the stability of the sandwich beam, such as the core thickness, the core elastic modulus and the thickness ratio of core-to-sheet. The research results, given in Figs. 4 though 7 and Tables 2 and 4, and their analysis show preliminarily that: (1) the critical instability load of foam-cored sandwich beam increases with increasing core thickness and elastic modulus; (2) the thickness ratio and elastic modulus ratio of core-to-sheet are key parameters to determine which kind of three instability modes finally occurs, e. g. overall buckling, symmetrical wrinkling and antisymmetrical wrinkling. Section 3 gives our preliminary conclusions in more detail with some suggestions for optimization design and engineering application of the foam-cored sandwich structure.

Experimental and Numerical Evaluation of Fatigue Behavior of Foam Core Sandwich Structure

Experimental and Numerical Evaluation of the Flexural Properties of Stitched Foam Core Sandwich Structure

Experimental study on fatigue failure and damage of sandwich structure with PMI foam core

In-Depth Study on Buckling and Wrinkling of Foam-Cored Sandwich Beam under Uniaxial Compression Load

Mode II Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures: the Effects of Frictional Stresses Between the Crack Edges

Three-Point Bending Fatigue Behavior of Aluminum Foam Sandwich Panels with Different Density Core Material

FEM Modelling of Single-Core Sandwich and 2-Core Multilayer Beams Containing Foam Aluminum Core and Metallic Face Sheets under Monolithic Bending

Fatigue behavior and damage mechanism of aluminum foam sandwich with carbon-fiber face-sheets

In Situ Surface Displacement Analysis of Fracture and Fatigue Behaviour under Bending Conditions of Sandwich Beam Consisting of Aluminium Foam Core and Metallic Face Sheets

Effect of core thickness and cell structure on flexural behaviour of closed-cell aluminum foam sandwich beams

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Mechanical Properties Test and Failure Analysis of Composite Foam Sandwich Structure in Ramp-Down Zone

Mode I Interfacial Fracture Characterization of Foam Core Sandwich Materials at Elevated Temperatures

Three-point Bending of Physically Asymmetric Metal Sandwich Beams with Aluminum Foam Core: Failure Behavior and Optimal Design

Experimental and Numerical Investigation of Static and Fatigue Behaviors of Composites Honeycomb Sandwich Structure

The Failure Behavior of Double-Layer Metal Foam Sandwich Beams under Three-Point Bending

Three-point bending performances of integral-forming aluminum foam sandwich

Flexural Behavior and Microstructural Material Properties of Sandwich Foam Core under Arctic Temperature Conditions

Deformation Behavior of Sandwich Hemispherical Structure under Axial Compression at Low Temperature

Finite Element Investigation of Fatigue Performance of CFRP-strengthened Beams in Hygrothermal Environments