Abstract:This paper proposes a decoupled three-phase load flow analysis method for unbalanced distribution systems. The power flows are solved through nodal current injection mismatch equations written in rectangular coordinates. The voltage changes resulting from nodal current injection mismatches and nodal admittance matrix have been decoupled into one contribution from the real part, conductance matrix, and the other contribution from the imaginary part, susceptance matrix. The method determines voltage changes resulting from conductance and susceptance matrices respectively, and determines the voltages of a node as a linear combination of those voltage changes. The relative contributions are determined based on the diagonals of the conductance and susceptance matrices. The constant active power and voltage magnitude(PV) nodes have been converted into constant active and reactive power(PQ) ones based on a sensitivity matrix determined through Kron reduction of the nodal admittance matrix, and the corresponding reactive powers are adjusted after each solution has converged. The zero-impedance branches are merged with adjacent impedance branches, and the three phases of a balanced-voltage PV bus are merged into one single-phase PV bus to be modeled in the nodal admittance matrix. Numerical examples on IEEE 37 node test feeder and IEEE 123 node test feeder are presented to demonstrate the effectiveness of the proposed method.

Balance Component Decomposition and Compensation Method for Unbalanced Load

Balanced Design Method for LCL/LCL Compensation Achieving Wide Load Range and High Misalignment Tolerance

A Graph-Based Power Flow Method For Balanced Distribution Systems

Study on Neutral-Point Voltage Balance of 3-Level NPC Inverter in 3-Phase 4-Wire System

Model for Optimal Balancing Single-Phase Traction Load Based on Steinmetz's Method

The Research of Control System of SVC for Reactive Compensation of Unblanced Three-phase Load

Anti-overcompensation control strategy in SVC based on steinmetz principle and instantaneous reactive power theory

Optional Design of Compensation Currents for D-STATCOM Used for Unbalanced Load

Optimum Design of Compensation Capacity for Balancing the Single-phase Traction Load

Decoupled Three-Phase Load Flow Method for Unbalanced Distribution Systems

Dynamic Phasor Model of Line Commutated Converter Under Unbalanced Conditions

Individual Sequence Control of DSTATCOM Compensation for Unbalanced Load

A Bi-Directional Voltage Regulating Balancer for DC Power Distribution Network

A New Control Strategy and Compensation Method on Hybrid System of Combining Apf with Shunt Capacitors

Fast Repetitive Controller Based Individual Phase Control Strategy for Cascaded DSTATCOM.

A novel control algorithm for magnetically controlled reactor

Research for Power Load Redistribution According to Optimized Strategy

Flexible Compensation Strategy for Voltage Source Converter Under Unbalanced and Harmonic Condition Based on a Hybrid Virtual Impedance Method

Balancing Compensation of 3-Ph Unbalanced Load with Cascade Inverters Based STATCOM

A Proposed Neutral-Point Voltage Balancing Method for Three-Phase Three-Level T-type Inverter under Non-Unity Power Factor

Research on the Transformer-isolated Multilevel H-bridges D-STATCOM for Unbalanced Load Compensation